zero volt ficm
Had problem with my truck shutting off while driving. It would shut off, crank back up after 30min and a day later do same thing. Did for about 2 weeks now no start. Ficm is reading zero volts on all the 4 screws. Replaced ficm, all fuses, all relays, and still reading zero. checked the wiring and am geting volts to ficm. After reading FICm diagram it reads that ficm wont sync if crankshaft sensor is bad. Does that mean that it will register zero? any other thoughts?
__________________
2004 F-350 CC LB King Ranch. SCT w/Innovative Diesel extreme Street tunes, tuned FICM by ID, custom 4" intake with large AFE filter, intake elbow, 3" downpipe 5" straight pipe 6" stack, EGR block off, Zoodad Mod, CCV Mod, the big 3 cable upgrade w/ batts under cab, Autometer guages, boost-trans-EGT, 2.5in leveling kit
|
Fri, April 30th, 2010, 09:26 PM
Threaded Mode