Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Ford Super Duty & Excursion > 2003 to 2007 6.0L Power Stroke Diesel

2003 to 2007 6.0L Power Stroke Diesel 6.0L Power Stroke Diesel equipped Super Duty and Excursion

Reply
 
Thread Tools Display Modes
  #1  
Old Tue, May 8th, 2012, 04:40 PM
1littlejoey 1littlejoey is offline
Whopper Junior
 
Join Date: May 2012
Posts: 2
1littlejoey is on a distinguished road
Default New 6.0L FICM Programmers

Anybody know anything about this new programer. My 2005 is going into the shop tommrow to replace the STC fitting and egr delete. Ive been calling PHP but knowone is answering.

Will I still need to send my FICM to be reprogramed or does this new tuner do this?

Thanks
Joe.
Reply With Quote
  #2  
Old Thu, May 17th, 2012, 08:42 PM
Lilpooh Lilpooh is offline
Whopper
 
Join Date: Mar 2012
Posts: 24
Lilpooh is on a distinguished road
Default New 6.0L FICM Programmers

With the Gryphon FICM programmer you don't need to send in your FICM. This programmer has all 4 FICM power levels at your disposal to swap in and out as many times as you want. It's also a monitor to watch up to 4 different parameters.

Very simple to use and load FICM tunes. Takes less than 2 minutes from start to finish. To load FICM tunes, remove FICM relay, plug into OBDII port, follow in screen instructions, turn key on, then off, it will ask you to remove the FICM relay if you didn't allready, select one of the tunes, download takes about 30 seconds, install FICM relay. There all done!

If your ready to order the Gryphon FICM programmer, it's easier to fill out the order form on their website. They process the orders in the order they come in.

If you have any other questions, just post up.
__________________
2004 F350 CC DRW King Ranch
X-3 tunes by DJ,QT,GH,ID,head studs,II Stage 1turbo,ATS coolant recirc lines,Swamp's 48v ficm,coolant filter,Snow Perf stage II,EGR delete,AD2,4" turbo back straight pipe,K&N intake,Quad "A" pillar autometer gauges,Suncoast Tri Disk Conv.,Billet input shaft,Suncoast superduty rebuild kit,Trans-go shift kit,Mag-Hytec trans pan,CFM+ elbow,ccv mod
Reply With Quote
  #3  
Old Fri, July 6th, 2012, 10:20 AM
Axehandler Axehandler is offline
Whopper Junior
 
Join Date: Nov 2010
Location: Crossfield, Alberta
Posts: 4
Axehandler is on a distinguished road
Default Looking to get the new Gryphon tuner

I'm in the market to get the new Gryphon tuner however i'd also like to get the ECM modifications.

Is that done with this tuner or would i need to send that in for a work-up?
Reply With Quote
  #4  
Old Sat, July 7th, 2012, 09:54 PM
Jeremy's Avatar
Jeremy Jeremy is offline
Spark Plug Inhibited
 
Join Date: Dec 2008
Location: Utah & Montana
Posts: 313
Jeremy is on a distinguished road
Default

Please describe what you mean by "ECM modifications".
__________________
19 F-350 6.7 Auto
16 F-350 6.7 Auto
05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM)
00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3
95 F-Superduty 7.3 DI, Auto, Mechanics Truck
94 F-Superduty 7.3 DI, 5 speed, Flatbed
Reply With Quote
  #5  
Old Fri, July 13th, 2012, 05:01 PM
Axehandler Axehandler is offline
Whopper Junior
 
Join Date: Nov 2010
Location: Crossfield, Alberta
Posts: 4
Axehandler is on a distinguished road
Default

The items explained on the FICM page
Power Hungry Performance - FICM Reprogramming

Particularly the difference outlined in the graphs
Power Hungry Performance - FICM Reprogramming
http://www.gopowerhungry.com/images/...ficm_tunes.jpg
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:56 PM.


All Contents Copyright 2008-2020, Power Hungry Performance