|
Upgrade your Evo Upgrade your Edge Evolution to a Gryphon Programmer to allow for custom tuning and additional functionality. Due to issues with the cable failures due to incompatible versions of firmware, we do not offer upgrades or tuning for the 1997-2003 F-Series gas or 7.3L diesel trucks. We recommend using another platform. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
DTC P061B
I recently sent my Edge tuner in to be transformed into a Gryphon because of my exhaust & intake additions to my '07 f150. For the past two weeks now I've been getting the P061B error, Internal Control Module Torque Calculation Performance. I got the error 3 times within the last two weeks. When the error arises the truck enters failsafe mode with the wrench lit up on the dashboard. Any ideas?
|
#2
|
||||
|
||||
Bill is in the office! Can you give him a shout? 678-963-9913
__________________
~ Corey Resting in Peace - 1969 - 2019 |
#3
|
|||
|
|||
Tried calling but no answer so I will try again later.
Thanks. |
#4
|
||||
|
||||
Quote:
- Jack
__________________
2014 F150 Platinum SCrew 3.5L EcoBoost 4x4 with SCT programmer |
#5
|
||||
|
||||
Quote:
Here's what my DTC library from Auto Enginuity gives me..... P061- HO2S Heater Resistance(bank 2, sensor 3) System Grouping: Fuel and Air Metering And Auxiliary Emissions controls
__________________
Antonio '01 F-250 6spd 2wd Handshaker 7.3L PSD Stealth Dual Hpops, AC Alliants Headstuds and Forged rods balanced DIY Regulated Return with Racor Filtration #54 GTP 38R out 4" exhaust Southbend Con OFE to get it to the ground Gauges...Boost, Pyro, Fuel Pressure and temp.,HPOil, EOT, Pre and Post CAC temps I'm sure some other stuff I forgot! |
#6
|
|||
|
|||
On aboutautomobile.com I found that the DTC for P061B is Powertrain: Internal Control Module Torque Calculation Performance. Maybe there is a difference because of the "B". Thanks for info.
|
#7
|
||||
|
||||
Fordtuff,
The reason that you're getting that code is because you don't have custom tunes yet! After talking with you, Bill looked up your order and proclaimed, "THAT'S why he's having a problem!" "Why?" I asked. "Because he doesn't have his tunes yet." A-HA! After you've downloaded your custom calibrations, you shouldn't have this problem anymore.
__________________
~ Corey Resting in Peace - 1969 - 2019 |
#8
|
||||
|
||||
Quote:
Alternatively, you MAY be able to program your PCM in Level 1 (transmission only) and get away with it. Level 1 in the canned tunes is supposed to do nothing more than firm up your shifts, which might be better than nothing! It won't hurt to try. - Jack |
|
|