|
|
|
|
#1
Sat, November 20th, 2010, 07:35 PM
|
|||
|
|||
None of my slash screens work
Messed around and made a few splash screens.
They look ok until I go to load them but they never appear on the gryphon at start up. It goes back to the gryphon bird thing everytime. Even with ones I've used previously. 
|
|
#2
Sun, November 21st, 2010, 12:33 AM
|
||||
|
||||
|
1) Which programmer do you have? Is it the monochrome gryphon or the newer CS/CTS?
2) What do you have them saved as?
__________________
|
|
#3
Thu, November 25th, 2010, 09:43 AM
|
|||
|
|||
|
1) its the original gryphon
2) I used paint to convert them to Monochrome
|
|
#4
Fri, November 26th, 2010, 06:12 PM
|
||||
|
||||
|
Ok, well make sure it is being saved specifically as a monochrome bitmap. Nothing else will work.
__________________
|
|
#5
Tue, December 7th, 2010, 08:29 PM
|
|||
|
|||
|
The files say bitmap image.
But any of the images I try, be it mine or ones that came from here on the forum, end up defaulting to the stock gryphon image.
|
|
#6
Tue, December 7th, 2010, 08:35 PM
|
||||
|
||||
|
When you go to change the splash screen is it showing up on the computer correctly before changing it on the programmer?
Also, if you aren't using paint you may have to download a plugin specifically for saving the pic as a monochrome bitmap.
__________________
|
 |
|
|
Hybrid Mode
