|
|
|||||||
| 6.0L PSD FICM Reprogramming Power Hungry Performance revolutionized the 6.0L FICM (Fuel Injection Control Module) programming and has been the industry standard for FICM modification for almost 15 years. If you have questions or would like more information about the benefits, please post here. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Tue, August 16th, 2011, 10:00 PM
|
|||
|
|||
program a "blank" FICM?
Hello, my 05 f-250 is beginning to have lower voltage from the ficm ( fluctuates between 42 and 48 volts) so I am going to replace it. If I get an new/reman from ford that is not programmed at all, will that present any problem for PHP to flash it with their tune. I also would like to send in my ECM for a rollback to the original (or better) tune as it got about 1 or 2 mpg better on the highway before the "recall" flash. As I understand it, having both the ecm and ficm flashed by PHP would give the best gains? Thanks, jim
|
|
#2
Wed, August 17th, 2011, 12:38 AM
|
||||
|
||||
|
No problem whatsoever. Fill out the appropriate order form and shipping form then send both boxes our way!
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
|
|
|
|
Linear Mode
