Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Ford Super Duty & Excursion > 2003 to 2007 6.0L Power Stroke Diesel

2003 to 2007 6.0L Power Stroke Diesel 6.0L Power Stroke Diesel equipped Super Duty and Excursion

Reply
 
Thread Tools Display Modes
  #1  
Old Thu, January 26th, 2012, 02:02 PM
Riche Riche is offline
Whopper Junior
 
Join Date: Jan 2012
Location: Baton Rouge, La
Posts: 5
Riche is on a distinguished road
Default My 2006 F250 FX4

New to the forum and have read a little, but would like to open a discussion on my truck and get some advice.
It is a 2006 F250 6.0 FX4 with about 125K.
I bought it wrecked and fixed it for a nice price. I know I want to put a monitor on it to watch for signs of egr failure which brought me to a crossroad. Do I want/need a tuner? Or just a monitor?
I have been reading enough to decide that I am interested in FICM reprogramming b/c I get 11mpg in town...
But I am not real sure if I want to hop it up more than that. It seems to have really good power compared to what I use to drive and until I decide if I want to do any mods I am not sure if I want a big H.P. tune.
At any rate if you wouldn't mind putting in your 2 cents on setups pro's and cons I would appreciate any advice.

Thanks,
Richard
Reply With Quote
  #2  
Old Thu, January 26th, 2012, 08:30 PM
Riche Riche is offline
Whopper Junior
 
Join Date: Jan 2012
Location: Baton Rouge, La
Posts: 5
Riche is on a distinguished road
Default

After reading some other posts it seems like my mpg's are lower than most people who did rollbacks. I wonder if I have other issues causing poor mpg?
Is the only way to find out what strategy you have is with a programmer?
Reply With Quote
  #3  
Old Sat, January 28th, 2012, 06:46 PM
Jeremy's Avatar
Jeremy Jeremy is offline
Spark Plug Inhibited
 
Join Date: Dec 2008
Location: Utah & Montana
Posts: 313
Jeremy is on a distinguished road
Default

If your happy with the power then its best to leave it alone. However you will need a programmer to see what your ficm and PCM program is. Or have the ford dealer tell you.
__________________
19 F-350 6.7 Auto
16 F-350 6.7 Auto
05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM)
00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3
95 F-Superduty 7.3 DI, Auto, Mechanics Truck
94 F-Superduty 7.3 DI, 5 speed, Flatbed
Reply With Quote
  #4  
Old Mon, January 30th, 2012, 11:13 AM
Riche Riche is offline
Whopper Junior
 
Join Date: Jan 2012
Location: Baton Rouge, La
Posts: 5
Riche is on a distinguished road
Default

Thanks Jeremy,

Do you know if I can read FMIC Stratagy with a matco genesis scan tool?
My friend has one.
Reply With Quote
  #5  
Old Tue, January 31st, 2012, 08:41 PM
Jeremy's Avatar
Jeremy Jeremy is offline
Spark Plug Inhibited
 
Join Date: Dec 2008
Location: Utah & Montana
Posts: 313
Jeremy is on a distinguished road
Default

I'm afraid I don't know.

sorry
__________________
19 F-350 6.7 Auto
16 F-350 6.7 Auto
05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM)
00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3
95 F-Superduty 7.3 DI, Auto, Mechanics Truck
94 F-Superduty 7.3 DI, 5 speed, Flatbed
Reply With Quote
  #6  
Old Wed, February 1st, 2012, 11:50 AM
Riche Riche is offline
Whopper Junior
 
Join Date: Jan 2012
Location: Baton Rouge, La
Posts: 5
Riche is on a distinguished road
Default

Well I guess I am on the fence, I want to get just a cs insight to monitor my motor in hopes to catch the oil cooler and egr problem before it happens. however I can't help but think about just getting the cs or cts with the tunes. Then I had to run across this site and fing out that there may be ecm/fcim stratagies that will hurt my perfomance if I get a cs/cts tunner. So now I am trying to discuss options with people, I am trying to read as much as I can in the meantime...

Playing with the idea of
1.insight and sct or 6 position chip
2.cs tunner

Thease options get affected b/c I think I need ecm/fcim stratagies changed along with my choice...
Reply With Quote
  #7  
Old Wed, February 1st, 2012, 04:12 PM
Jeremy's Avatar
Jeremy Jeremy is offline
Spark Plug Inhibited
 
Join Date: Dec 2008
Location: Utah & Montana
Posts: 313
Jeremy is on a distinguished road
Default

Where do you live?

You have two options, there are no 6 position chips for the 6.0's. That is a 7.3 item.

If you want to get tunes, just order a CS and when it comes you be able to see what your hex code is. If its a code you don't like then you'll know the code and can have the truck rolled back. But you'll have the canned tunes on the CS, and if you like them leave it alone, if you don't you can order custom tunes for it.

or....

You can also order the insight CS and that will tell you your hex code, and then order custom tunes for an SCT from PHP or another vendor.
__________________
19 F-350 6.7 Auto
16 F-350 6.7 Auto
05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM)
00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3
95 F-Superduty 7.3 DI, Auto, Mechanics Truck
94 F-Superduty 7.3 DI, 5 speed, Flatbed
Reply With Quote
  #8  
Old Wed, February 1st, 2012, 05:52 PM
Riche Riche is offline
Whopper Junior
 
Join Date: Jan 2012
Location: Baton Rouge, La
Posts: 5
Riche is on a distinguished road
Default

Thanks for the reply's Jeremy,
I'm in Louisiana,

Looking at how they were starting to offer custom tuning software for the 6.0 guess I made the assumption it would come with a 6 position chip. It must just re-flash the ECM?

So it boils down to just deciding on sct or cs/cts... It will not affect the tunes that come with them "canned tunes" if I decide to do ecm/ficm rollbacks?
Reply With Quote
  #9  
Old Wed, February 1st, 2012, 08:54 PM
Jeremy's Avatar
Jeremy Jeremy is offline
Spark Plug Inhibited
 
Join Date: Dec 2008
Location: Utah & Montana
Posts: 313
Jeremy is on a distinguished road
Default

Right, it doesnt really matter what your hex code is when it comes to "canned" tunes.....just the custom ones.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:58 AM.


All Contents Copyright 2008-2020, Power Hungry Performance