04-08 F-150 Manual Updated

Corey Cohron RIP · #1 Sun, August 23rd, 2009, 09:34 PM

Finally finished up the new and improved manual for the 05-08 F150 Gryphon. It can be downloaded HERE. If you happen to find any typos, please let me know so that they can be fixed! :thank you:

***88Racing*** · #2 Sun, August 23rd, 2009, 10:22 PM

Quote:

Originally Posted by Groovy Chick

Finally finished up the new and improved manual for the 05-08 F150 Gryphon. It can be downloaded HERE. If you happen to find any typos, please let me know so that they can be fixed! :thank you:

Typo in your post. Should be "04-08".

Lars

Corey Cohron RIP · #3 Sun, August 23rd, 2009, 10:24 PM

Gee, thanks. :o

WoodWacker · #4 Mon, August 24th, 2009, 03:39 PM

Hello from the Left Coast.

You asked for errors to the manual so here are 3 that I found. P21; next to the red=50% diaplay refers to the image to the LEFT but the image is really on the RIGHT. Page 23; similar item but refers to screen to the RIGHT but it is to the LEFT. Page 26; under the heading of "DISPLAY REMAINS ON WITH KEY OFF" has battery misspelled 3 times.

On another note I downloaded my 'tunes' yesterday and in doing so I pushed the "enter" key before disconnecting the Gryphon from the USB port. Is that a problem? I see references to it on this forum but no explanation as to what is bad about doing so.

I won't get to program my truck until this weekend as I want to get some baseline 0-60 and 1/4 mile numbers first. Then I'll be logging changes as I note them.

Thanks for the 'tunes' and this forum.

WoodWacker

Corey Cohron RIP · #5 Mon, August 24th, 2009, 06:59 PM

Thank you! I'd already gotten a message about the battery thing (where the heck was my head?

), and I just fixed the other two.

You now have an additional $150 Gameroom cash for your help!

About the [ENTER] thing, I honestly don't know. I'll have to run it past Bill.

So glad you're liking the forum and find it useful!

***88Racing*** · #6 Tue, August 25th, 2009, 01:00 AM

Should there or shouldn't there be a warning for custum options menu?
Where as pertaining to the adjustment of ceratain parameters other than TS or GR. That they could have significant value changes due to not being a "canned" or "generic" tune anymore.
The only reason I bring this up is that there has been some miscommunication from some users that now have custom tunes that have tried to apply some of there shift points and other parameters to the new customs that Bill has wrote.

Lars

***Longshot270*** · #7 Sun, November 1st, 2009, 08:44 AM

Do you want to put something in there about the data log feature? I know it took me almost an hour to figure everything out.