Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Minotaur Automotive Tuning Software

Minotaur Automotive Tuning Software Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here.

Also, check out our Facebook group: Facebook - Minotaur Tuners

Reply
 
Thread Tools Display Modes
  #1  
Old Sat, January 1st, 2011, 12:57 PM
GTS GTS is offline
Bacon King
 
Join Date: Feb 2010
Posts: 65
GTS is on a distinguished road
Default Couple questions.

OK so I have a couple more questions. First if I want to adjust a large area of a map to a certain value is there a way to do this all at once? I know you can highlight the area and raise it with the + or - puttons but when you do that it raises all the highligted areas the same. So if there is a taper to the map it won't flatten it out. If you double click on one spot or hit enter it will bring up a box that you can put a value in. That is what I'm looking to do for a large area but when I highlight a large area and hit enter I don't get the box to enter a value into.

Also I have a sniper chip. I'd kind of like to see what the tuning looks like on it. Is there a way to pull the tunes off it and load it up in my Minotaur software and see what they look like?
Reply With Quote
  #2  
Old Sat, January 1st, 2011, 08:30 PM
Pocket Pocket is offline
Bacon King
 
Join Date: Oct 2009
Location: Parker, CO
Posts: 97
Pocket is on a distinguished road
Default

Quote:
Originally Posted by GTS View Post
OK so I have a couple more questions. First if I want to adjust a large area of a map to a certain value is there a way to do this all at once? I know you can highlight the area and raise it with the + or - puttons but when you do that it raises all the highligted areas the same. So if there is a taper to the map it won't flatten it out. If you double click on one spot or hit enter it will bring up a box that you can put a value in. That is what I'm looking to do for a large area but when I highlight a large area and hit enter I don't get the box to enter a value into.
If you know what the values are supposed to be on the map, you could always switch to numbers view and enter them there.

Here's the thing, if you copy one single point, you can only paste one single point. If you copy one column, you can paste one column. Does that make sense?

Quote:
Originally Posted by GTS View Post
Also I have a sniper chip. I'd kind of like to see what the tuning looks like on it. Is there a way to pull the tunes off it and load it up in my Minotaur software and see what they look like?
Talk to Bill, he'll get you what you need.
Reply With Quote
  #3  
Old Sun, January 2nd, 2011, 12:32 PM
Blowby's Avatar
Blowby Blowby is offline
Double Whopper
 
Join Date: Jan 2009
Location: CO
Posts: 29
Blowby is on a distinguished road
Default

CTRL+Enter
Set multiplier to 0
Enter value to the ADD field
Leave Pivot alone
__________________
F250 Reg Cab - 1,172 HP / DJ# / 11.56 Fuel Only / 10.94 Nitrous / Dyno Run 10-2009
--------------------------------------------------
Wide Open Performance - Engine, Chassis Build
Swamps Diesel Performance - Injectors & IDM
Gearhead Automotive Performance - Stage II Cam
Reply With Quote
  #4  
Old Sun, January 2nd, 2011, 08:45 PM
GTS GTS is offline
Bacon King
 
Join Date: Feb 2010
Posts: 65
GTS is on a distinguished road
Default

Thanks Pocket I'll give Bill a call.

Thanks Mike, that's exactly what I was looking for.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:52 AM.


All Contents Copyright 2008-2020, Power Hungry Performance