|
|
|||||||
| Gryphon Programmer Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
 |
|
|
Thread Tools | Display Modes |
|
#11
Fri, March 6th, 2009, 10:37 PM
|
||||
|
||||
Your update is ready. Tried to call but I'm sure you're out doing Friday Fun Stuff!
If you have not already installed Pegasus, please look here: [pi][/pi] Let me know if you have any questions. Have a great weekend. 
__________________
Bill Cohron - The Mad Doctor   Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1996! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back  Windows™ XP and 7.  Windows™ Vista and Windows™ 8 is a pain in my a$$!  Windows™ 10 is only slightly less annoying!
|
|
#12
Sat, March 7th, 2009, 09:29 AM
|
|||
|
|||
|
Hi Bill
I have Pegasus installed and it is connecting to the Gryphon. I'll be home for the next 3 hours 7 -10 am PST and then gone a couple of hours and then here the rest of the day. Looking forward to talking to you. Thanks Larry
|
|
#13
Sat, March 7th, 2009, 10:42 AM
|
|||
|
|||
|
Hi Bill
This is getting interesting  I connected to Pegasus and then selected the Targeted Functions option and it appeared to run ok. At the end though it displays "Connecting to Bridge - please wait" and just stays there. I am not getting the message that it completed or the device restart. Maybe this will be a clue of what is happening now. Thanks Larry
|
|
#14
Sat, March 7th, 2009, 12:16 PM
|
||||
|
||||
|
Larry,
Everything is working correctly. What the software fails to mention is that on the early vehicle programmers, instead of going to the disclaimer it goes to "Connecting to Bridge". This is perfectly normal. Simply unplug the unit form the USB (BEFORE you hit the OK button), reconnect and then click OK. At this point though, it really doesn't matter. Once the unit has restarted and has any sort of display on it, the update is finished. Plug the unit in your truck and start programming. 
__________________
Bill Cohron - The Mad Doctor Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1996! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back Windows™ XP and 7. Windows™ Vista and Windows™ 8 is a pain in my a$$! Windows™ 10 is only slightly less annoying!
|
|
#15
Sat, March 7th, 2009, 12:58 PM
|
|||
|
|||
|
Hi Bill
I get the same message as the original problem when I try to program the truck "File missing TASC3N4 update required" This code is the Hex code that comes up when the unit first starts. I don't know if that means anything  Are these Heritages assembled from a bunch of left over parts from 2003 and a few new parts of 2004 that don't match very well? Thanks Larry
|
|
#16
Sat, March 7th, 2009, 05:05 PM
|
||||
|
||||
|
Larry,
Sorry about that. I messed up and didn't include the new calibration in the list of supported files. All fixed now and ready for another download. As for the Heritage, I hate to say it but they are rebadged 2003 leftovers. Not that there's anything wrong with them I just think it's a crappy way to market leftover vehicles. You know someone in marketing got a huge bonus for that idea! Take care.
__________________
Bill Cohron - The Mad Doctor Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1996! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back Windows™ XP and 7. Windows™ Vista and Windows™ 8 is a pain in my a$$! Windows™ 10 is only slightly less annoying!
|
|
|
|
Linear Mode
