Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Hydra Chip 17-Position Chip

Hydra Chip 17-Position Chip The Power Hungry Performance Hydra Multi-Position Chip is the industry standard for the 7.3L!

Redesigned from the ground up, the Hydra Chip provides Ford owners with a feature packed,
high quality, and low cost alternative to other existing modules on the market today.

Reply
 
Thread Tools Display Modes
  #1  
Old Sat, September 25th, 2021, 03:49 PM
beerbeer95648 beerbeer95648 is offline
Whopper Junior
 
Join Date: Sep 2021
Posts: 2
beerbeer95648 is on a distinguished road
Default Help please

I've been having trouble with my chip. I know I did a lot of good cleaning. But what it looks like was when I installed the chip I must have caught this piece here on the PCM. I'm extremely nervous to try to bend it back in place in case I break the thin solder joint. Anybody know what this is specifically, and if someone could re-solder (not me) it if I break it?
Attached Images
File Type: jpg 20210925_133956.jpg (1.17 MB, 9 views)
File Type: jpg 20210925_134406.jpg (1.44 MB, 9 views)
Reply With Quote
  #2  
Old Sun, September 26th, 2021, 10:01 PM
Power Hungry's Avatar
Power Hungry Power Hungry is offline
The Godfather of Power Stroke Tuning
 
Join Date: Nov 2008
Location: Winder, GA
Posts: 2,458
Power Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud of
Default

Quote:
Originally Posted by beerbeer95648 View Post
I've been having trouble with my chip. I know I did a lot of good cleaning. But what it looks like was when I installed the chip I must have caught this piece here on the PCM. I'm extremely nervous to try to bend it back in place in case I break the thin solder joint. Anybody know what this is specifically, and if someone could re-solder (not me) it if I break it?
When installing the Hydra in an OBS PCM, the crystal (the little metal can) needs to be folded down out of the way so that it does not any of the components on the PCM or touch the chip itself.

I hope this helps.
__________________
Bill Cohron - The Mad Doctor

Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1996!
(678) 890-1110

www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar!

Bring back Windows™ XP and 7.
Windows™ Vista and Windows™ 8 is a pain in my a$$!
Windows™ 10 is only slightly less annoying!
Reply With Quote
  #3  
Old Mon, September 27th, 2021, 10:48 AM
PHP Ward's Avatar
PHP Ward PHP Ward is offline
Super Moderator
 
Join Date: Oct 2020
Posts: 35
PHP Ward is on a distinguished road
Default

Quote:
Originally Posted by Power Hungry View Post
When installing the Hydra in an OBS PCM, the crystal (the little metal can) needs to be folded down out of the way so that it does not any of the components on the PCM or touch the chip itself.

I hope this helps.

Bill,

Is that crystal a re-solderable part if it gets broken? Would that be something we could repair in-house or would that be something for Diesel Tech or a circuit board repair shop?

-Ward
Reply With Quote
  #4  
Old Tue, September 28th, 2021, 02:21 PM
Power Hungry's Avatar
Power Hungry Power Hungry is offline
The Godfather of Power Stroke Tuning
 
Join Date: Nov 2008
Location: Winder, GA
Posts: 2,458
Power Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud of
Default

Quote:
Originally Posted by PHP Ward View Post
Bill,

Is that crystal a re-solderable part if it gets broken? Would that be something we could repair in-house or would that be something for Diesel Tech or a circuit board repair shop?

-Ward
Good question...

If for some reason it should go *snap*, yes it can be resoldered. However, in 25 years I've never actually broken one. You gotta get pretty frisky with it to cause the lead to break.

The trick is to keep the flexing to an absolute minimum. If you work any piece of metal back and forth enough, it'll break. If you just lean it over gently, you shouldn't have any problems at all.

I hope this helps.
__________________
Bill Cohron - The Mad Doctor

Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1996!
(678) 890-1110

www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar!

Bring back Windows™ XP and 7.
Windows™ Vista and Windows™ 8 is a pain in my a$$!
Windows™ 10 is only slightly less annoying!
Reply With Quote
  #5  
Old Tue, September 28th, 2021, 06:04 PM
beerbeer95648 beerbeer95648 is offline
Whopper Junior
 
Join Date: Sep 2021
Posts: 2
beerbeer95648 is on a distinguished road
Default

Took your advice as well as the guys from DTC and pushed the crystal flat in the direction it was already bent. It now has room to clear the chip and is not touching anything else. Seem to be back in business. Thank you guys.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:03 PM.


All Contents Copyright 2008-2020, Power Hungry Performance