Getting ready to do mods ????

[cleatus12r]

As for your fuel bowl....

[epowers777]

Will that carb cleaner take the rust off? Just got a bunch tools from harbor freight to make my life easier!!!! Taking the turbo off tomorrow hopefully.Going to put the wicked wheel on and heat wrap all the pipes!!

[907DAVE]

That stuff works AWESOME on aluminum, but I dont think it will pull rust off.

Check this out..............


Cookie's Crap Corvette Tips No.1

[epowers777]

Ive been e mailing rosewood injectors. Every e mail I get back is confusing and they never answer my questions correctly. Is there another place I can look for injectors at a good price.

[epowers777]

Also in search of single shot injectors is there a certain code im looking for or just ask for single shots?

[epowers777]

Can i remove the HPOP lid and suck all the old oil out?

[907DAVE]

You have to pull the Allen head plug and suck the oil out that way.

Search for AC code injectors, or Stage 1 singles.

[epowers777]

Here is a pic of my rebuilt fuel bowl. the vinigar worked good on cleaning the bowl.
Also here is the turbo with the whistln wheel on it. The instructions did not give a tourque. Is there on?

[epowers777]

How do i know if this is the original engine?? It seems like there is alot of new stuff on the engine. gaskets look new etc. Were is the engine number?

[907DAVE]

Originally Posted by epowers777

Here is a pic of my rebuilt fuel bowl. the vinigar worked good on cleaning the bowl.
Also here is the turbo with the whistln wheel on it. The instructions did not give a tourque. Is there on?

Just as long as it is fully seated, the torque delivered from the turbine shaft will keep the wheel tight.

Originally Posted by epowers777

How do i know if this is the original engine?? It seems like there is alot of new stuff on the engine. gaskets look new etc. Were is the engine number?

The serial # is stamped in the block next to the rear of the oil cooler, above the oil filter.

See Blue