|
6.0L PSD FICM Reprogramming Power Hungry Performance 6.0L FICM (Fuel Injection Control Module) programming has been the industry standard for in FICM modification almost 10 years. If you have questions or would like more information about the benefits, please post here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
program a "blank" FICM?
Hello, my 05 f-250 is beginning to have lower voltage from the ficm ( fluctuates between 42 and 48 volts) so I am going to replace it. If I get an new/reman from ford that is not programmed at all, will that present any problem for PHP to flash it with their tune. I also would like to send in my ECM for a rollback to the original (or better) tune as it got about 1 or 2 mpg better on the highway before the "recall" flash. As I understand it, having both the ecm and ficm flashed by PHP would give the best gains? Thanks, jim
|
#2
|
||||
|
||||
No problem whatsoever. Fill out the appropriate order form and shipping form then send both boxes our way!
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory! |
|
|