|
|
|||||||
| Gryphon Programmer Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Mon, July 25th, 2011, 08:58 PM
|
||||
|
||||
Will this cause the truck to throw out codes?
As the title says, will adding a 3" hole in the airbox letting in more air from behind the headlight cause a problem and have the truck throw out codes? Attached is the picture of what it looks like.
|
|
#2
Mon, July 25th, 2011, 10:34 PM
|
||||
|
||||
|
No issues there. Run it!
__________________
Tuning, flashing, burning chips, and repairing all aspects of 7.3L Powerstrokes. SEVEN 7.3L-powered vehicles in the driveway. Two didn't come that way from the factory!
|
|
#4
Wed, July 27th, 2011, 07:43 AM
|
||||
|
||||
|
Buying or building? I've been planning something similar because in this heat my temps are gettin' pretty high.
__________________
|
|
#5
Wed, July 27th, 2011, 09:14 AM
|
||||
|
||||
|
Quote:
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him.
|
|
#6
Wed, July 27th, 2011, 02:20 PM
|
||||
|
||||
|
I'm building it. I'm going to cut a 3" hole in the air box and have a PVC pipe that has a lip slide through from inside the box so it can't slide out and try to shape it to the box then connect an elbow to direct another pipe down towards the headlight.
|
|
|
|
Linear Mode
