Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Gryphon Programmer

Gryphon Programmer Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it.

If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here.

Reply
 
Thread Tools Display Modes
  #1  
Old Wed, December 23rd, 2009, 04:18 PM
88Racing's Avatar
88Racing 88Racing is offline
SENIOR MODERATOR
 
Join Date: Feb 2009
Location: Somewhere ....
Posts: 5,818
88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light
STATE INSPECTION ADVISORY FOR GRYPHON/EDGE OWNERS

Recent threads and posts are indicating that some of your trucks are going in for state inspections.
If you do the following you'll have a better chance at passing.
1. There should be no need to put the truck back to stock level 0.
2. Simply unplug and remove programmer and cable and go to test station.

If the above aren't followed and you put your truck back to stock level 0 you'll get a p1000 code and won't pass.

If you think you need to have the truck tested with stock programming than do it a week before and drive at least 50 miles before going to the test station.
P1000 FAQ Link:
http://forum.gopowerhungry.com/faq.p...50_drive_cycle

Thank you
Have a Good One!

Last edited by 88Racing; Thu, December 24th, 2009 at 09:01 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:08 PM.


All Contents Copyright 2008-2020, Power Hungry Performance