|
The Conversation Pit This is where EVERYTHING else goes. No subject is too mundane. How's the weather in your area? Did your kid cut his first tooth? Really, what do you think about the President? And don't get me started on Cummins and Duramaxes. Have at it! |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
I GOT IT!! I GOT IT!!!
The big brown truck came today. I was at work, so when my wife heard the doorbell ring and looked outside. Nothing. So she went to the other door. Nothing. She looked again and in the corner was a little white box. When I got home she told me that it came, and commented that if I paid $300 for a box that small I got ripped off. I asked her if size determines value. If so, her diamond rings are really worth nothing. Sometimes... "to the moon Alice". Can't wait to install this bad boy. Prolly not tomorrow 6* for the high.
|
#2
|
||||
|
||||
We ran out of our usual boxes that are 10 X 6 X 3 and had to use the box in which the chip was shipped to us. :sadface: You'll see that I had to fold up your instructions and stuff to get it all in the box. It irked me to do it!
Please let us know what you think of your new toy!
__________________
~ Corey Resting in Peace - 1969 - 2019 |
#3
|
||||
|
||||
I can feel your excitement , the day for my suggested delivery i will be face first on the post office window before they open with hands on the glass going " open , open , open " lol
__________________
When the going gets tough slap it in 4wheel high and plow through the junk! |
#4
|
||||
|
||||
Quote:
Glad you got it! But your lucky your wife didn't put you in the ER! LOL's Be safe! If it going to be 30*F or less when you do your programming I'd recomend running the truck 15-20 minutes before progamming it this warms up the motor which warms up the PCM and putting on a 1.25 amp/hr battery tender during the programming session.
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. Last edited by 88Racing; Wed, December 9th, 2009 at 11:46 PM. |
#5
|
||||
|
||||
so when i get mine next week, its been averaging -30 each day by noon, earlier in the day you don't wanna know lol, should i take it in a shop for the first original tune load?
__________________
When the going gets tough slap it in 4wheel high and plow through the junk! |
#6
|
||||
|
||||
Quote:
Read this link: http://www.f150online.com/forums/chi...irections.html
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
#7
|
||||
|
||||
I got a Pheonix. So the temp is not critical, right? There is no programming to do. No biggie on the box. It is goin to the garbage. The goodies inside is what matters!
|
#8
|
||||
|
||||
No worries with the temperature and a Phoenix chip.
__________________
~ Corey Resting in Peace - 1969 - 2019 |
#9
|
||||
|
||||
oh man now i gotta start renovating again it is going to be a pain to make a garage door in my bedroom so i can park it beside the bed at night and tuck it in
__________________
When the going gets tough slap it in 4wheel high and plow through the junk! |
#10
|
||||
|
||||
See... someone else who remembers those old Mervyn's commercials.
__________________
Bill Cohron - The Mad Doctor Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1996! (678) 890-1110 www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar! Bring back Windows™ XP and 7. Windows™ Vista and Windows™ 8 is a pain in my a$$! Windows™ 10 is only slightly less annoying! |
|
|