![]() |
|
Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Ok so I bought a used Gryphon and just want to make sure everything is in working order before I connect it to my truck. The previous owner assured me it was returned to stock mode before shipping it.
So I downloaded the Pegasus program and followed the install instructions and everythng seemed fine. I plugged the unit in to the USB on the computer, should the unit light up? The unit doesn't light up, blink or anything. Now when the unit is plugged in I get the following on the Pegasus screen. COM4, Connected- type 2, Port Idle, 2k/nt/xp, HD s/n: EED4B18A, EEF2400, S/N:00003138 I am planning on using the canned tunes at this time just to get it up and running, So does this all sound correct? I have read so many pages of install instruction and I'm still not sure if this unit is operating correctly or not, it doesn't respond(light up) as I have seen described on the f150online forum. Sorry for the Question's if this has been answered somewhere else but I haven't found anything that answers this particular question |
#2
|
|||
|
|||
![]()
Anyone????
|
#3
|
||||
|
||||
![]()
From your description, it appears Pegasus is recognizing the Gryphon, so that part is fine. What's not fine is that the Gryphon screen is not lighting up. It should be red when first plugged in, then turn to green when Pegasus connects to it.
However, it will not hurt anything at all to plug it into your truck. Until you tell it to program the PCM, it's just a passive monitor. So, go to your truck and turn the ignition key to ON, without starting your engine. Then, plug the Gryphon into the OBDII port (you do not have to mount the Gryphon on the dash to do this). If the Gryphon screen shows your truck's hex code, you should be in business. If it still does not light up, you may have the display set to "dim" or off. I'll have to get back to you later on this though. We have guests due to arrive at any second. - Jack
__________________
2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
#4
|
||||
|
||||
![]()
Yes, try what Jack said and report back.
__________________
|
#5
|
|||
|
|||
![]()
Ok I took the unit out and connected it to the truck and the screen lit up, blue. Went thru the programming steps without a hitch. But I noticed when it started up the screen said Edge Evolution, nothing about Gryphon. So how can I tell if this unit has the Gryphon update or not? i just read on the PHP website and it states that the Gryphon units are all black and the Edge units are all silver, My unit is black so it should be a gryphon correct?
Thanks for the help, Kenny Last edited by daparrothead; Fri, December 9th, 2011 at 09:16 PM. |
#6
|
||||
|
||||
![]()
If it is the original evo with the black case, then you have a gryphon. If you want to be sure then hook it up to your computer and update everything you can through pegasus.
|
#7
|
||||
|
||||
![]() Quote:
__________________
SENIOR MODERATOR--PTLA God doesn't have a Facebook but he's my friend. God doesn't have a twitter, but I follow him. |
#8
|
||||
|
||||
![]()
And, I've responded to this in the thread at F150online. Basically, I think the screen color is set to "true blue". The red and green pixels are turned off. Once they are activated (menu option), he should see it working on the PCs.
- Jack |
#9
|
|||
|
|||
![]()
Thanks for the reply Jack, I replied also on the f150 forum.
It loaded the level 2 tow tune just fine and the difference is night and day, the way it should have been from Ford to begin with lol. I'll have to hook it back up to the truck and play with the display menu and see if the lighting changes color now. So I'm not looking for a fire breathing drag strip monster lol but would the difference in the canned tow tune to a custom tune be as drastic as the change from stock to the canned tow tune? I really can't believe the difference already! ![]() Thanks Again, Kenny |
#10
|
||||
|
||||
![]() Quote:
Drive your truck for a while and try to think of ways it could be improved before you order. And, I'm glad you aren't looking for a "fire-breathing" monster - these are working trucks and they need to be treated as such. - Jack |
|
|