![]() |
|
Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I found out today my custom tunes were ready for download. So i'm trying to download the tunes but i'm getting a bunch of error messages. The first one that pops up when I hit update- custom file download internet. I get is a internet error incountered the page cannot be found. And then a message pops up saying process failed unable to loacte a valid target instruction file and then goes on to tell how that could happen. Then I click ok and then on the pegasus screen this comes up.
Unable to locate a Target Instruction file. Process failed Update failed. Please contact your vendor for assistance Can somebody help me? Is it something i'm doing wrong? Thanks Garret |
#2
|
||||
|
||||
![]()
Flats, my guess is your tunes have been named with a serial number that doesn't match your unit. When you connect your Gryphon to Pegasus, you should see the Serial Number (S/N) in the information bar at the bottom of the Pegasus window. That number needs to be given to PHP so that Bill can rename your files.
In addition, it would help them if you filled out all the information in your User Profile. I see that it is mostly blank. You'll probably have to call Corey during their office hours to get this straightened out. - Jack
__________________
2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
#3
|
|||
|
|||
![]()
Thanks, I was able to talk to somebody and have to call back with my S/N on the pegasus page like you were saying. I also updated my information on my profile.
|
#4
|
|||
|
|||
![]()
I also was told on the phone wensday my tunes would be ready but i havent gotten an email. I updated my cs on fusion 1 hour ago but everything in the still says edge evolution when you turn it on. Has there been a recent update by edge for the cs for a 7.3?
|
#5
|
||||
|
||||
![]() Quote:
I suspect your tunes are not ready, and have not been loaded. Just to be sure, go to [Help]->[Device Info] on the CS and look at the Calibration Version. If you see four zeros in the middle of that number as in n.0000.nnnn, you have custom tunes. If they are not zeros, your tunes are canned. And I recently updated the tune download instructions for the CS/CTS. They are here: http://forum.gopowerhungry.com/gryph...html#post59581 Hopefully, this will explain any funny behavior you see when you do yours. - Jack
__________________
2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
#6
|
|||
|
|||
![]()
I have the same problem. But I try to get it fix by email but I have no answer from Bill. Corey she aware of the problem and she told me to send an email to Bill but still no answer. I send the first email the 8 of may and the last one on 18 of june and still no answer from bill.
I think I will have better chance to do it by phone I guest. |
#7
|
||||
|
||||
![]() Quote:
- Jack |
|
|