|
|
|||||||
| Gryphon Programmer (Disabled) Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
|
|
Thread Tools | Display Modes |
|
#1
Fri, March 23rd, 2012, 10:05 AM
|
|||
|
|||
Did my HEX code change?
I had my truck in the shop getting some tranny work done. I had reverted my programmer to stock before i dropped it off. A while after I got the truck back I tried to program it... and it didnt work. Said something about the HEX code not compatible.... so now what?
|
|
#3
Fri, March 23rd, 2012, 02:17 PM
|
||||
|
||||
|
So, you are able to retrieve your hex code using the Gryphon? That sounds like the unit has initialized correctly. Possibly, your battery is weak. Could you put it on a charger for a while until it shows fully charged? If so, once the battery looks good, try reprogramming.
If this doesn't work, you MAY have a corrupted file in the Gryphon. If it's the monochrome Gryphon, try reloading the firmware/software using [Updates]->[Gryphon Update Manager] then reload any custom tunes you have with [Updates]->[Custom File Download (Internet)]. If it's the CS/CTS model, you can update firmware/software by plugging it in to Fusion on your PC, but that will wipe out any custom tunes you have and Bill will have to set up a download package on the Fusion server for you to get them back. - Jack
__________________
 2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam |
|
|
Linear Mode
