Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Gryphon Programmer

Gryphon Programmer Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it.

If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here.

Reply
 
Thread Tools Display Modes
  #1  
Old Sun, February 20th, 2011, 12:45 AM
fourbtgait fourbtgait is offline
Whopper Junior
 
Join Date: Feb 2011
Posts: 1
fourbtgait is on a distinguished road
Default Use of the Gryphon

So for 2 days I have been reading threads here and at PHP site about tuners and such, now have just a few basic questions I have not seen answers to. I did also post on F150 Forum but decided since I am going to buy a Gryphon, to post where they are set up.
Truck is 2007 F150, 5.4, XLT with tow package, totally stock except for shocks and Gott modification.
1. With the Gryphon, can one change tunes from one to another using the screen such as from performance to towing just before taking off?
2. When I order it, it comes with three canned tunes, tranny, 87 tow and 93 performance if I have that right. I never use 93 octane, so until custom tunes show up, I would either have to use 93 octane or run 87 with the tow tune?
3. Or can one get a canned 87 tow and a canned 87 performance tune?
4. What does the tranny tune give a person, allow them to do?

The first question is one of most importance, ease of changing. Some days I will just decide to hook either the boat up or the travel trailer and go, so want to be able to easily (just push a button?) just go without resetting things. Used to have a superchip handheld that was a pain as you had to take time to change it.
Thank you in advance.
Reply With Quote
  #2  
Old Sun, February 20th, 2011, 03:08 AM
ticopowell's Avatar
ticopowell ticopowell is offline
Grown-up in training!
 
Join Date: Oct 2009
Location: Currently in Tampa FL
Posts: 888
ticopowell will become famous soon enough
Default

Quote:
Originally Posted by fourbtgait View Post
So for 2 days I have been reading threads here and at PHP site about tuners and such, now have just a few basic questions I have not seen answers to. I did also post on F150 Forum but decided since I am going to buy a Gryphon, to post where they are set up.
Truck is 2007 F150, 5.4, XLT with tow package, totally stock except for shocks and Gott modification.
1. With the Gryphon, can one change tunes from one to another using the screen such as from performance to towing just before taking off? It takes a few minutes, and all the changable settings are saved if you do it right, so all it is is the time to tell it to change, reload the original settings (by selecting 1 option in the menu) then wait for the programmer to program the new settings. for my 05 F-150 it's been as short as 30 seconds, but averages about a minute to load the new tune.
2. When I order it, it comes with three canned tunes, tranny, 87 tow and 93 performance if I have that right. I never use 93 octane, so until custom tunes show up, I would either have to use 93 octane or run 87 with the tow tune? Yes, the 87 tow tune is recommended, it wont get quite the mileage because it runs a little richer, but you wont notice much at all, if any. you could jump to the 93 but you should run a few tanks of it through before loading the program just to make sure the old lower octane gas is all out.
3. Or can one get a canned 87 tow and a canned 87 performance tune? as far as I know, you can only get the 87 tow and the 93 performance, as well as the tranny tune to come canned. but you can for sure order a custom 87 performance, that is what I did.
4. What does the tranny tune give a person, allow them to do? all it does is make the shifting better without changing the engine's settings. I have never used it, and I took it off when I got the custom tunes.

The first question is one of most importance, ease of changing. Some days I will just decide to hook either the boat up or the travel trailer and go, so want to be able to easily (just push a button?) just go without resetting things. Used to have a superchip handheld that was a pain as you had to take time to change it.
Thank you in advance.
see answers in blue hope I helped.
Reply With Quote
  #3  
Old Mon, February 21st, 2011, 06:38 PM
88Racing's Avatar
88Racing 88Racing is offline
SENIOR MODERATOR
 
Join Date: Feb 2009
Location: Somewhere ....
Posts: 5,818
88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light88Racing is a glorious beacon of light
Default

1. Ease of changing tunes...
The truck must be OFF>>>NO ENGINE RUNNING....
Then the tunes can be swapped with the key on only no engine run...
Trucks pcm needs to be warm...cold flashing may discharge the battery or have an ill effect on the pcm...in cold conditions the use of a battery tender or running the truck before flashing is preferred..
2. If you want to run 87 octane you'll use either levels 1 tranny or 2 87 canned tow...
3. The canned tunes only come the way they are...
4. Tranny only allows the use of any octane cause only the tranny is adjusted not the engine...
__________________
SENIOR MODERATOR--PTLA

God doesn't have a Facebook but he's my friend.
God doesn't have a twitter, but I follow him.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:03 PM.


All Contents Copyright 2008-2020, Power Hungry Performance