|
|
|||||||
| Gryphon Programmer Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it. If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here. |
 |
|
|
Thread Tools | Display Modes |
|
#1
Wed, March 2nd, 2011, 04:19 PM
|
|||
|
|||
First Steps
Im waiting to fly home and my Gryphon is waiting on me! WOO HOO! I looked around and noticed that I need to download Pegasus and enter the HEX code and all that jazz, but I wasnt sure if I could go ahead and plug it up to the truck and start rolling? I know I need the HEX code for pegasus and to submit but was just curious if I could do that later and install it now without any updates.
|
|
#2
Wed, March 2nd, 2011, 04:24 PM
|
||||
|
||||
|
It will be ready to go once you get it. just plug it into your truck, but have a paper handy to write down your HEX code. It will pop up on the screen shortly after it turns on. Make sure you follow the instructions and have the key on when the you first plug it in, but make sure the motor is off! once you have your hex code, submit it, and you dont need to worry about pegasus until your custom tunes are sent to you.
 oh and the next step is to ENJOY!  
|
|
#3
Wed, March 2nd, 2011, 06:47 PM
|
||||
|
||||
|
Reading the manual is the first thing you should do. Then start playing with everything else.
__________________
|
|
#5
Fri, March 4th, 2011, 06:17 PM
|
||||
|
||||
|
Yes to all of the above. And, please don't start mucking about with "custom options" until you've driven the truck a while with a tune installed and understand what you want to change. The canned tunes that come with the Gryphon are set up by an expert to improve your driving experience. Unless you have the same knowledge, there's no real reason to try to improve on them.
- Jack
__________________
 2014 F150 Platinum SCrew 3.5L EcoBoost 4x4 with SCT programmer
|
|
|
|
Linear Mode
