Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Gryphon Programmer

Gryphon Programmer Edge Product has discontinued the Edge Evolution 2, but we still provide support and tuning for it.

If you have a question or comment relating the Gryphon (or Evolution) programmer, post it here.

Reply
 
Thread Tools Display Modes
  #1  
Old Mon, April 25th, 2011, 11:04 AM
darrenFX4 darrenFX4 is offline
Whopper
 
Join Date: Feb 2011
Posts: 15
darrenFX4 is on a distinguished road
Default Went to change program, error code came up..

Ok have had my gryphon for several months and love it. I was changing my level and was doing a custom program (to input proper tire size) and this and Error code F1 came up saying, it does not support this calibration, which it always had. said update or call tech support.... not exactly sure what to do
Reply With Quote
  #2  
Old Mon, April 25th, 2011, 11:31 AM
Jackpine's Avatar
Jackpine Jackpine is online now
PHP Groupie
 
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 4,328
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default

Quote:
Originally Posted by darrenFX4 View Post
Ok have had my gryphon for several months and love it. I was changing my level and was doing a custom program (to input proper tire size) and this and Error code F1 came up saying, it does not support this calibration, which it always had. said update or call tech support.... not exactly sure what to do
This is covered in the owner's manual under Troubleshooting.
1. Leave the ignition key in the ON position.
2. Disconnect the Gryphon at the OBDII port.
3. Plug the Gryphon back into the OBDII port.
4. After getting to the main screen, wait 15 seconds for needed parameters to be loaded.
If you still cannot program the PCM successfully, contact PHP for assistance.

- Jack
__________________

2014 F150 Platinum SCrew 3.5L EcoBoost 4x4 with SCT programmer
Reply With Quote
  #3  
Old Mon, April 25th, 2011, 12:20 PM
darrenFX4 darrenFX4 is offline
Whopper
 
Join Date: Feb 2011
Posts: 15
darrenFX4 is on a distinguished road
Default

Ahh, 10-4 I apologize, I couldn't find my PDF manual on my comp (I found it now). I apologize. Thanks for the reply Jack.
Reply With Quote
  #4  
Old Mon, April 25th, 2011, 12:24 PM
Jackpine's Avatar
Jackpine Jackpine is online now
PHP Groupie
 
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 4,328
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default

It's fine Darren - hope the problem goes away.

- Jack
Reply With Quote
  #5  
Old Mon, April 25th, 2011, 03:10 PM
darrenFX4 darrenFX4 is offline
Whopper
 
Join Date: Feb 2011
Posts: 15
darrenFX4 is on a distinguished road
Default

yup prob solved!
Reply With Quote
  #6  
Old Mon, April 25th, 2011, 03:28 PM
Jackpine's Avatar
Jackpine Jackpine is online now
PHP Groupie
 
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 4,328
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default

Good to hear, Darren -

We're not like some forums. If you have questions, it never hurts to ask. I only said the answer was in the manual to remind others who might have a similar problem.

- Jack
Reply With Quote
  #7  
Old Thu, January 12th, 2012, 07:51 PM
madpirahna madpirahna is offline
Whopper Junior
 
Join Date: Dec 2009
Location: Clarksburg, WV 26301
Posts: 3
madpirahna is on a distinguished road
Default

and it worked because it just happened to me and I came on the forum and used the search function.

Thank, I was worried for a minute.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:51 PM.


All Contents Copyright 2008-2020, Power Hungry Performance