Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > 6.0L PSD FICM Reprogramming

6.0L PSD FICM Reprogramming Power Hungry Performance 6.0L FICM (Fuel Injection Control Module) programming has been
the industry standard for in FICM modification almost 10 years.

If you have questions or would like more information about the benefits, please post here.

Reply
 
Thread Tools Display Modes
  #1  
Old Mon, May 14th, 2012, 11:29 AM
freeride808 freeride808 is offline
Whopper Junior
 
Join Date: Apr 2012
Posts: 2
freeride808 is on a distinguished road
Default FICM programmer used for ECM rollback

Bill or anyone,

I have heard that with one of the PHP purchased FICM programmers you can also use it to load a new (old) programer "perferred".

How is this done? And is there cost on top of the FICM programmer purchase?

I ask becauce my FICM programmer should be here in a few days.

Thanks

Baron
Reply With Quote
  #2  
Old Tue, May 15th, 2012, 12:24 PM
Corey Cohron RIP's Avatar
Corey Cohron RIP Corey Cohron RIP is offline
Wil and Liam's Mom
 
Join Date: Nov 2008
Location: Winder, GA
Posts: 2,876
Corey Cohron RIP is a glorious beacon of lightCorey Cohron RIP is a glorious beacon of lightCorey Cohron RIP is a glorious beacon of lightCorey Cohron RIP is a glorious beacon of lightCorey Cohron RIP is a glorious beacon of lightCorey Cohron RIP is a glorious beacon of light
Default

Yes, we can use the FICM programmer to roll back your ECM. The prices are listed on the FICM page of the website.
__________________
~ Corey

Resting in Peace -
1969 - 2019
Reply With Quote
  #3  
Old Thu, June 7th, 2012, 10:02 AM
Cajunrgfm Cajunrgfm is offline
Whopper
 
Join Date: Jun 2012
Location: Ottawa, Canada
Posts: 19
Cajunrgfm is on a distinguished road
Default

Not to hijack, but g chick, with the purchase of your programmer, is it locked to 1 truck, or can i do all my 6.0 rollbacks and tunes ? I already have a cts.
Reply With Quote
  #4  
Old Thu, June 7th, 2012, 05:05 PM
Jeremy's Avatar
Jeremy Jeremy is offline
Spark Plug Inhibited
 
Join Date: Dec 2008
Location: Utah & Montana
Posts: 313
Jeremy is on a distinguished road
Default

Its not locked to one truck per say, as bill does the rollback remotely for each truck using the programmer(gryphon mono chrome display) to do it. So it is time consuming, and would take awhile to roll back each of your trucks. Once its changed(again by Bill remotely) to a FICM programmer, you can tell him how many trucks you intend to program and he'll "unlock" for that many trucks. Once a truck has been programmed with the FICM programmer you may change the programs from Mileage, A40, A80 and Herc to your hearts content on each and everyone of them.

I hope this helps
__________________
19 F-350 6.7 Auto
16 F-350 6.7 Auto
05 Excursion 6.0, Auto, PHP Atlas 40 FICM, ARP Studs VXBC6(truck PCM)
00 F-350 7.3, 12 Speed, PHP Gryphon, PHP hydra, DAC3
95 F-Superduty 7.3 DI, Auto, Mechanics Truck
94 F-Superduty 7.3 DI, 5 speed, Flatbed
Reply With Quote
  #5  
Old Wed, June 20th, 2012, 09:47 PM
legionxxii legionxxii is offline
Whopper Junior
 
Join Date: Apr 2012
Posts: 2
legionxxii is on a distinguished road
Default

Im with the OP here on this if I read right on the site it says the ECM rollback is $50 for previously modified FICM. So Im assuming that since your buying the $400 FICM tuner it would be $50 to have a rollback correct? I want to know cause I have the VXAP1xx strategy and want to change it.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:32 AM.


All Contents Copyright 2008-2020, Power Hungry Performance