|
|
|||||||
| 1999 to 2003 7.3L Power Stroke Diesel 7.3L Power Stroke Diesel equipped Super Duty and Excursion |
|
|
Thread Tools | Display Modes |
|
#1
Thu, January 26th, 2012, 10:17 AM
|
|||
|
|||
Engine perimiters
Hello guys I got my Aeroforce gauge installed last weekend. I was just wanted to get some info so I know what some of the engine perimiter values I should be seeing, such as exhaust back pressure (seeing about 30 at idle and about 50 if I punch it real quick while cruising), coolant/oil temp, torque converter slippage, IPR duty cycle (I'm seeing about 7.5 at idle and 22 cruising at 70), Injector pulse width. I'm seeing about 500psi on the ICP at idle. Here's a video of the gauge doing the cycle mode. I haven't got the kit yet to get the egt reading, so not running it too hard. I'm also going to get the sensor kit to read fuel pressure. I pulled 2 codes when I first got the gauge and thought I had stored them on my phone before I cleared the codes, but guess I didn't save them.
__________________
01 F350 7.3 4x4 CC SRW/3.73/315-75-16/Aeroforce Interceptor/BD Thruster II/ Bellowed Up-Pipes/4" turbo back exhaust/CCV Mod/DIY 6637/FPR Shimmed to 65 PSI/TS chip reburned with PHP tunes (Stock, 40T WITH Whsiper tune, 80DD, 100R, 140Ex, 140SS)/Replaced and Cleaned EBPS & Tube 4-6-12/Zoodad mod/Recon smoked cab lights/MM Hubs/Cowl Hood/HPx 
|
|
|
Threaded Mode