Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Hydra Chip 17-Position Chip > FAQs - Hydra Chip 17 Position Chip

FAQs - Hydra Chip 17 Position Chip Instructional Videos and Tips for installing your
Hydra Chip as well as the HydraFlash software.

Reply
 
Thread Tools Display Modes
  #1  
Old Tue, October 18th, 2022, 09:56 AM
Power Hungry's Avatar
Power Hungry Power Hungry is offline
The Godfather of Power Stroke Tuning
 
Join Date: Nov 2008
Location: Winder, GA
Posts: 2,458
Power Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud ofPower Hungry has much to be proud of
Default Hydra Functional Test Procedure

Every once in a while we get a call about a chip that seems to work on some positions and not on other. While this is an extremely unusual situation, it is certainly possible. Fortunately, this is a very easy situation to test.

In order to qualify whether the chip is functional in all positions, Please perform the following:

Erase the chip and then program ALL positions with the following files, making sure to use the correct HEX code for the application. (Note: If you have custom files that were sent with your chip, you MUST save these files to your computer or you will lose them.) This process only takes a couple minutes and can save a lot of back and forth with diagnosing a chip concern.

For each position, select the following Hi Idle files:

01 - 0 HP 1000 RPM High Idle
02 - 0 HP 1100 RPM High Idle
03 - 0 HP 1200 RPM High Idle

04 - 0 HP 1000 RPM High Idle
05 - 0 HP 1100 RPM High Idle
06 - 0 HP 1200 RPM High Idle

07 - 0 HP 1000 RPM High Idle
08 - 0 HP 1100 RPM High Idle
09 - 0 HP 1200 RPM High Idle

10 - 0 HP 1000 RPM High Idle
11 - 0 HP 1100 RPM High Idle
12 - 0 HP 1200 RPM High Idle

13 - 0 HP 1000 RPM High Idle
14 - 0 HP 1100 RPM High Idle
15 - 0 HP 1200 RPM High Idle

Once the Hydra is programmed, start the vehicle and switch to each position to verify if the Idle RPMs change relative to the file in a given position. There should be an obvious change in Idle RPM for each position and should reflect the RPM for that position.

If all the positions reflect the Idle RPM change correctly, then both the chip and the connection to the PCM are fine. If you were experiencing a drivability issue, it's safe to assume that the problem be related to the calibrations that were on the chip. If these were custom files, please contact your vendor or tuner for further assistance.

If any of the positions drop back to a normal Idle RPM (usually around 700 RPM) or otherwise do not reflect the Idle RPM for that position, then please contact Power Hungry Performance for further assistance in order to arrange to have the chip replaced.

I hope this information is helpful.

Take care.
__________________
Bill Cohron - The Mad Doctor

Power Hungry Performance - The ORIGINAL in Ford performance tuning... Since 1996!
(678) 890-1110

www.gopowerhungry.com - Home of the Hydra Chip, Minotaur Tuning Software, and the new Orion Reflash System for Navistar!

Bring back Windows™ XP and 7.
Windows™ Vista and Windows™ 8 is a pain in my a$$!
Windows™ 10 is only slightly less annoying!
Reply With Quote
Reply

Tags
hungry, hydra, performance, power, replace, testing, warranty

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:03 PM.


All Contents Copyright 2008-2020, Power Hungry Performance