Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > Minotaur Automotive Tuning Software

Minotaur Automotive Tuning Software Tune your own 7.3L Diesel! If you have a question or comment about Minotaur? Post it here.

Also, check out our Facebook group: Facebook - Minotaur Tuners

Reply
 
Thread Tools Display Modes
  #1  
Old Thu, November 8th, 2012, 11:10 AM
strokeorcroak strokeorcroak is offline
Whopper
 
Join Date: Feb 2010
Posts: 13
strokeorcroak is on a distinguished road
Default Help with Idle

Have a set of fairly large and not exactly "common" hybrids in one of our trucks.

400cc with 200% nozzles, completely modded to be as fast as the builder could make them. So obviously standard hybrid tuning for 200% nozzles is probably not going to work the greatest.

At this point really all I am after is the idle, that seems like a good point to start with dialing this in. I have multiple files which are designed for a similar setup (twin hpops, large 200% hybrids, large single turbo, built transmission, TDE1 PCM)

So I take a file that seems to drive decent, but just idles like crap. I am going to attempt to make this file idle more clearly. Keep in mind, I have very little minotaur experience but feel like I know the mechanical side of this truck very well.


Can someone point me in a direction to start? I will make 6 different changes to the same file and see where that gets us idle wise.
__________________
96' f350 on 35's
stage 1's, custom tuned, built tranny, IC, modded IDM
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:39 PM.


All Contents Copyright 2008-2020, Power Hungry Performance