Power Hungry Performance Forum  

Go Back   Power Hungry Performance Forum > Power Hungry Performance Product Information > 6.0L PSD FICM Reprogramming

6.0L PSD FICM Reprogramming Power Hungry Performance 6.0L FICM (Fuel Injection Control Module) programming has been
the industry standard for in FICM modification almost 10 years.

If you have questions or would like more information about the benefits, please post here.

Reply
 
Thread Tools Display Modes
  #1  
Old Sun, February 12th, 2012, 09:23 AM
majek5's Avatar
majek5 majek5 is offline
Nothin' Stock
 
Join Date: Nov 2009
Location: Northern Illinois
Posts: 217
majek5 is on a distinguished road
Default FICM questions

I read an article on PSO about HP and Torque gains with a FICM reprogram. I have VXCF4H2 currently. Would I benefit from a reprogram? Not exactly sure on how the ECM/TCM/FICM all relate as to performance. In the section on the webpage it says turnaround time is usually 24 hours if I send it in vs. waiting for a programmer. Is that still current? Any drawbacks to this?
__________________
'06 6.0 F350 CCLB KR.

stock...
Reply With Quote
  #2  
Old Tue, February 14th, 2012, 06:01 PM
majek5's Avatar
majek5 majek5 is offline
Nothin' Stock
 
Join Date: Nov 2009
Location: Northern Illinois
Posts: 217
majek5 is on a distinguished road
Default

Bueller...Bueller...Bueller...
__________________
'06 6.0 F350 CCLB KR.

stock...
Reply With Quote
  #3  
Old Tue, February 14th, 2012, 06:24 PM
ticopowell's Avatar
ticopowell ticopowell is offline
Grown-up in training!
 
Join Date: Oct 2009
Location: Currently in Tampa FL
Posts: 888
ticopowell will become famous soon enough
Default

it looks like your ficm has a decent strategy, IDK how it compares to what it would be reprogrammed to, but it isn't one of the bad ones. you can always get a programmer and get quite a bit of power out of your truck, but it is up to you. I wish I knew more about the 6.0's to help you.
the turnaround time is accurate as far as I know, the only drawback is not being able to use your truck while the ficm is gone.
Reply With Quote
  #4  
Old Sun, February 19th, 2012, 10:12 AM
majek5's Avatar
majek5 majek5 is offline
Nothin' Stock
 
Join Date: Nov 2009
Location: Northern Illinois
Posts: 217
majek5 is on a distinguished road
Default

Does the PHP tuning compare to the KEM FICM tuning power wise? If they are comparable, PHP is 1/2 price!
__________________
'06 6.0 F350 CCLB KR.

stock...
Reply With Quote
  #5  
Old Mon, February 20th, 2012, 02:18 AM
ticopowell's Avatar
ticopowell ticopowell is offline
Grown-up in training!
 
Join Date: Oct 2009
Location: Currently in Tampa FL
Posts: 888
ticopowell will become famous soon enough
Default

Honestly I couldn't tell you since I have never heard of KEM tuning... but I know that Bill is considered one of the best in the business, if not the best. look up their "about us" page to see more on who he has tuned for. IMO he is the best because of his care for his customers when they are in trouble, and his desire for safety and longevity of the engines. He can tune an engine to make a ton of power, but he wants safe power, not just a lot of it. I hope that helps
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:29 PM.


All Contents Copyright 2008-2020, Power Hungry Performance