|
|
Visit dYgYtAl Radio! |
|
|||||||
| Gryphon™ CS and CTS Programmer Post here if you have a question or comment about the Gryphon CS (Color Screen) or CTS (Color Touch Screen) Programmer.
AFTER YOU DOWNLOAD YOUR CUSTOM TUNES, DO NOT PLUG YOUR PROGRAMMER BACK INTO FUSION, OR YOUR CUSTOM TUNES WILL BE ERASED! PLEASE BE AWARE THAT IF YOU CONNECT TO FUSION FOR EDGE'S LATEST FIRMWARE UPDATE, YOU WILL ERASE YOUR CUSTOM TUNES! |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
Can someone help clear this up for me? I think I screwed up.
I ordered a CS from another site because they offered free overnight shipping at the same price. When I was poking around the order forms for the CS Custom tuning it asked if it the CS was "New from PHP" or "USED" and a few other options I can't remember off the top of my head but I don't think apply. Used being $60.00. Am I supposed to pick "USED"? I thought that I had read in a forum that since all CS/CTS devices use the Edge Fusion server now that custom tunes were simply $30. Does PHP charge an extra $30 even if it's new from somewhere else? Also, while i'm at it...the order form gives option for 3 pull-downs on the tune selection page. Each selection would be $30/$60 correct? Sorry for my ignorance here...the website and order form are slightly confusing. |
|
||||
|
I had purchased my CS from another site also.All you have to do is go to this page and find your year and have your CS converted to a gryphon.http://www.gopowerhungry.com/_ordering_info.shtml. Fill out the form with what you have for modifications and future mods.Select tunes for the year of your truck and don't forget to put your HEX code also known as ECM code on your CS.It is 60 for converted Edge CS per tune and 30 for Gryphons bought from PHP.I think it was 25 for converting.Well worth the money so don't sweat it bud.You can find you ECM or HEX code by following these directions.1st when you receive the CS install the fusion software on your computer from Edges website it will be the latest version.After installing software hook your CS up to the computer and let the software update the CS.2nd once that is complete it might take a little bit of time.Then unplug and install in your truck.3rd power up the unit by starting and choose maker of your truck.Then you should be at the menu.If not press menu/help/vehicle info your ECM code is there this is also known as a HEX code.Make sure you update the fusion software before you send to PHP so you know it is up to date.If you have any other questions please post here.I just went through this so it is still fresh in my mind.Good Luck you will enjoy the CS.
__________________
My 08 F150 FX4 Leveled |
|
|||
|
Thanks for clarification.
Bummer, I shouldn't have been so impatient I guess...oh well. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|
|
|