|
|
Visit dYgYtAl Radio! |
|
|||||||
| Gryphon™ CS and CTS Programmer Post here if you have a question or comment about the Gryphon CS (Color Screen) or CTS (Color Touch Screen) Programmer.
AFTER YOU DOWNLOAD YOUR CUSTOM TUNES, DO NOT PLUG YOUR PROGRAMMER BACK INTO FUSION, OR YOUR CUSTOM TUNES WILL BE ERASED! PLEASE BE AWARE THAT IF YOU CONNECT TO FUSION FOR EDGE'S LATEST FIRMWARE UPDATE, YOU WILL ERASE YOUR CUSTOM TUNES! |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
I know PHP was unable to get tranny tunes for the 2010 f150s a few months ago. Are you now able to tune the tranny?
I had a gryphon in my 06 f150 and loved it, so now i want this tranny to respond like it should. I loved my gryphon but the CS does look purdy. Can i get a plain Gryphon for my 2010 f150 with 4.6 3 valve 6 speed? Or do i need the CS? Can the traction control be removed with the push of the button and not just untill 35 mph? or can it be removed at all with a tune?
__________________
2010 F150 XLT with the 3 valve 4.6 and 6 speed auto |
|
||||
|
Yes the tranny can be tuned now in the 09-10 f150's.....as far as the other? 'S Bill should respond or be contacted....
__________________
PHP on FaceBook SENIOR MODERATOR--PTLA WARNING.....THE FOLLOWING TYPES OF THREADS WILL BE CLOSED OR DELETED... "Where my tunes?" & "I can't get a hold of PHP?" |
|
||||
|
Quote:
But heck, you have a new truck - it needs a prettier programmer, right? - Jack
__________________
2005 F150 KR SCrew 5.4L 4x4 with PHP Gryphon CTS programmer |
|
|||
|
I just bought some tires for my truck and now i feel the need for more power to counteract the bigger tires and to re calibrate the speedo. I'm on the verge of buying now... couple of questions first...
The plain gryphon was able to be setup so that if i went over a user set speed it would beep and flash at me... that kept me from getting many tickets... does the CS do this? I also need to be able to disable the traction control... it is driving me nuts!!! can i get a custom tune that disables it for good when on that specific tune? i can't stand the fact that my 35,000 truck sounds like its falling apart when i get on wet grass and the tires spin... does more harm then good in the snow too... JMHO...are the canned tunes safe to use, i read a few threads on here about pinging and stuff that makes me leery on running them before i get my custom ones in...
__________________
2010 F150 XLT with the 3 valve 4.6 and 6 speed auto |
|
||||
|
Quote:
I've had no pinging or other issues with my 09, 5.4L, 3V.
__________________
"Good judgement comes from experience. Experience comes from bad judgement." - Colin Powell to new batch of 2LTs (while serving as V Corps Commander) Factory manuals here: http://www.motorcraftservice.com |
|
||||
|
And, Shorse - you CAN set a speed warning alert on the CS/CTS programmer. I have mine set at 85, since the Interstate speed limits here are 75. It always makes me "jump" when it goes off.
Like shotgun, I have no knowledge of the ability to alter traction control. - Jack
__________________
2005 F150 KR SCrew 5.4L 4x4 with PHP Gryphon CTS programmer |
|
|||
|
i'm really surprised that this is not a more common question. I know when i was looking at other programers that one had TCS disable as a perk to it. If they can do it i'm sure Bill can, but i want to make sure before i fork up the cash and get disappointed.
__________________
2010 F150 XLT with the 3 valve 4.6 and 6 speed auto |
![]() |
| Thread Tools | |
| Display Modes | |
|
|
|
|