[OneTomcat]

I figured that one would have any teacher pulling her hair out

[88Racing]

You may want to add this in.
Upon installation make sure the OBDII/cigarette lighter fuse is in good condition.

And at any point in the future when changing calibration files that the user should check the fuse "before" switching calibration files.

Also add this in for if the display ever goes blank.

Lars

[JackandJanet]

Originally Posted by Groovy Chick

Where the heck did I put THAT? I'll fix it if you tell me where the mistake can be found, TomCat. (At least it's correct on the website. :o)

It's still not fixed, Corey - first paragraph in BIG red letters on page 5 of the manual.

And, on page 9 in the table: "With engine running, sows charging system voltage" - I think you meant "shows".

Did you mean for page 25 to be "blank"? If so, might be appropriate to print "THIS PAGE INTENTIONALLY BLANK" in big letters.

- Jack

[Groovy Chick]

I had fixed it but had forgotten to publish the most recent version. :o Other mistakes remedied. Thank you!

[glockwinger]

Hey Groovychick...

I put new shoes on my truck and went to the new download-able manual to find out how to change the tire size and found a little bitty typo (well, actually the omission of one numeral:

On page 15, step 3, the equation reads: 27.5 + 431.8. It should read: 427.5 + 431.8.

Thanks for all you do!

"Glock"

[Longshot270]

Do you want to put something in there about the data log feature? I know it took me almost an hour to figure everything out.

[JackandJanet]

Originally Posted by glockwinger

Hey Groovychick...

I put new shoes on my truck and went to the new download-able manual to find out how to change the tire size and found a little bitty typo (well, actually the omission of one numeral:

On page 15, step 3, the equation reads: 27.5 + 431.8. It should read: 427.5 + 431.8.

Thanks for all you do!

"Glock"

Good catch, Glock! Corey - he's correct (it's the "sample" calculation).

And, Longshot, I agree. It would be VERY helpful to have information in the manual about using the data log feature. Don't suppose you'd like to take a stab at writing a draft for it would you? I've never tried any data logging myself, so at the moment, you're far more expert than me. And, I suspect Corey is not really knowledgeable about it either and would have to get everything from Bill (who is busy writing tunes).

- Jack

[Longshot270]

Ok, I'll see what I can come up with.

[Longshot270]

Ok, I have a basic write up with pictures but it wont let me put it on here. So l'll be emailing it in a few minutes.

[JackandJanet]

Originally Posted by longshot270

Ok, I have a basic write up with pictures but it wont let me put it on here. So l'll be emailing it in a few minutes.

Thanks! I'm sure Corey will appreciate it.

- Jack