|
|
Visit dYgYtAl Radio! |
|
|||||||
| Minotaur™ Automotive Tuning Software Tune your own 7.3L Diesel! If you have a question or comment about Minotaur?, post it here. |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
||||
|
It defiantly seems like it tries to shift.
I couldn't find the target slip time, I read that in another post but couldn't find it. I did raise the TV pressure and it helped a little on the 1-2 shift but it still isn't right.
__________________
96 7.3L E4OD, Ext. Cab 22x,xxx miles Intake, Exhaust, 6.0L IC, 4 Wheel Disc Brakes. Dana 60, Electric Fuel, SD HPOP, 6" Miter cuts, 3" plenums Rosewood Stage IIs, Built tranny. Minotaur with some tunes from Bill ![]() Planning: Traction bars, HPOP, Nitrous?? Last edited by 907DAVE; 04-01-2011 at 05:57 PM. Reason: I made a bo-bo. |
|
||||
|
Dang, any other ideas? All i really see the could speed up the shifts are the TV tables
__________________
96 7.3L E4OD, Ext. Cab 22x,xxx miles Intake, Exhaust, 6.0L IC, 4 Wheel Disc Brakes. Dana 60, Electric Fuel, SD HPOP, 6" Miter cuts, 3" plenums Rosewood Stage IIs, Built tranny. Minotaur with some tunes from Bill ![]() Planning: Traction bars, HPOP, Nitrous?? Last edited by 967.3L4x4; 04-01-2011 at 07:42 PM. |
|
||||
|
Quote:
__________________
F250 Reg Cab - 1,086.6 HP / DJ# / 11.56 Fuel Only / 10.94 Nitrous / Dyno Run 10-2009 -------------------------------------------------- Empire Diesel Performance Swamps Diesel Performance - Injectors & IDM Gearhead Automotive Performance - Stage II Cam |
|
||||
|
The over run will increase as power increases, with Stage II's shoot for about -350/400 rpm from your actual target RPM. Also rev limiter will go the other way so add rpm to your target point. If you want 3600 input 3900 or so..... hope this helps.
__________________
F250 Reg Cab - 1,086.6 HP / DJ# / 11.56 Fuel Only / 10.94 Nitrous / Dyno Run 10-2009 -------------------------------------------------- Empire Diesel Performance Swamps Diesel Performance - Injectors & IDM Gearhead Automotive Performance - Stage II Cam |
![]() |
| Thread Tools | |
| Display Modes | |
|
|
|
|