Power Hungry Performance Forum
Page 11 of 22 « First 78910 11 1213141521 Last »
Show 100 post(s) from this thread on one page

Power Hungry Performance Forum (http://forum.gopowerhungry.com/index.php)
-   2004 to 2008 F-150 and Mark-LT (http://forum.gopowerhungry.com/forumdisplay.php?f=13)
-   -   The kd4crs/Power Hungry/Gotts Mod (revisited - and with pictures) (http://forum.gopowerhungry.com/showthread.php?t=340)

88Racing Thu, February 12th, 2009 01:56 PM
Bill,

Thank you for publishing the mod and putting it where others and lurkers can find it easily. Thanks to everyone else for outstanding contributions and their great job. Also, I remembered something KISS. Won't let that go again!

Lars

Jim Allen Thu, February 12th, 2009 02:15 PM
I've got a request in for a little flowbench time. I'll test the mod exactly as it's shown, versus the stock. I'll even try an AEM panel filter I have with it and a Brute Force intake as well. Should be a nice comparo

kd4crs Thu, February 12th, 2009 02:38 PM
Jim, that is exactly the setup I am running with the AEM dryflo panel filter and the DWV intake mod. I am very curious to see the results. Thanks for taking the time to test this for everyone. :2thumbs:

92 5.0 Thu, February 12th, 2009 08:06 PM
The 3 inch pipe is in what section of the store? I have never seen black PVC before?

kd4crs Thu, February 12th, 2009 08:20 PM
It is black 3 inch ID ABS DWV pipe from the plumbing section.

88Racing Thu, February 12th, 2009 08:28 PM
Look or ask for ABS drain waste vent pipe in the plumbing section. Its commonly cheaper than pvc and only requires a one step glue. The pipe is already black and the glue is usually black also. Not all hardware supply stores carry ABS pipe for it may not meet plumbing code in the area they are selling it in. Why keep it on hand if no one can use it.

Lars
:thumbsup:
:gryphon:

92 5.0 Thu, February 12th, 2009 08:37 PM
Yea looking on the website I don't think they carry that up here in Wisconsin.

Mark_123 Thu, February 12th, 2009 11:08 PM
Here's the 3" piece of flex PVC I used:

http://cgi.ebay.com/ws/eBayISAPI.dll...m=200253587568

Extreme Justice Thu, February 12th, 2009 11:14 PM
Quote:
Originally Posted by kd4crs (Post 3338)
Jack,

I checked the web sites for both stores and Lowe's has them on the web site but Home Depot does not. Home Depot may carry them but I can't be certain since they are not on their web site. You may also be able to find a similar item at a local plumbing supply house. Anyway, here is the Lowe's link:

http://www.lowes.com/lowes/lkn?actio...DSC&lpage=none

I tried to adhere to the KISS principle during the whole development process for this mod. :)
This is what I found from the Homedepot site. Would this work? is it the same thing as Lowe's. Looks different.

Have a look

http://www.homedepot.ca/webapp/wcs/s...k=P_PartNumber

kd4crs Thu, February 12th, 2009 11:25 PM
I don't think it will fit the outside diameter of the female coupler. That transition is meant to fit the outside diameter of 4 inch pipe. You may be able to order the downspout connector over the web.


All times are GMT -4. The time now is 12:40 AM.
Page 11 of 22 « First 78910 11 1213141521 Last »
Show 100 post(s) from this thread on one page


All Contents Copyright 2008-2024, Power Hungry Performance