Power Hungry Performance Forum
Page 2 of 3 1 2 3
Show 100 post(s) from this thread on one page

Power Hungry Performance Forum (http://forum.gopowerhungry.com/index.php)
-   Gryphon Programmer (Disabled) (http://forum.gopowerhungry.com/forumdisplay.php?f=7)
-   -   ECM: not located!!! (http://forum.gopowerhungry.com/showthread.php?t=1644)

88Racing Wed, August 12th, 2009 11:46 PM
Quote:
Originally Posted by 4x4billy (Post 13876)
K, thanks... i've tried reading through the forum and i cant really find the same problem.
What year is your truck?

The one thing I thought of why this error is popping up is that your hex code is not supported by the firmware in the gryphon.
By this I mean the gryphon has a a hex/calibration table loaded into it's memory and if your truck's hex doesn't match one of them in the table then your SOL.
The only other thing I can suggest doing is running an update on the firmware on Pegasus. But that's only if you have canned tunes. DON'T do the update if customs are involved!
Bill is your only hope.
Nothing more I can do.

Lars

4x4billy Wed, August 12th, 2009 11:46 PM
hold.........

4x4billy Wed, August 12th, 2009 11:51 PM
Quote:
Originally Posted by Power Hungry (Post 13877)
Okay.... here's a quick question or two.

Quickly though, when you have a second, please fill in your user information in the forum Control Panel so we know who we're dealing with. Makes things much easier from a support standpoint.

First question - What year truck is this?

Seconds question - Does the OBDII connector have 1 wire coming out that splits into two, or does it just have 1 wire on the left side and a 4-pin connector on the right?

I'll be around in the gameroom lobby for a bit to answer quick questions.

Thanks.
2006 4.6 xlt
1 wire (bundle) that splits into 8 little wires???? that go straight into the port

4x4billy Wed, August 12th, 2009 11:55 PM
Quote:
Originally Posted by 88Racing (Post 13878)
What year is your truck?

The one thing I thought of why this error is popping up is that your hex code is not supported by the firmware in the gryphon.
By this I mean the gryphon has a a hex/calibration table loaded into it's memory and if your truck's hex doesn't match one of them in the table then your SOL.
The only other thing I can suggest doing is running an update on the firmware on Pegasus. But that's only if you have canned tunes. DON'T do the update if customs are involved!
Bill is your only hope.
Nothing more I can do.

Lars
I'm still trying to get up to speed. I expected the gryphon to come with the custom tunes that were ordered. But after some reading and second guessing... i have to have my Hex code to send to the php guys and they will create the files that i can download to my pc.

or???

88Racing Wed, August 12th, 2009 11:56 PM
Quote:
Originally Posted by 4x4billy (Post 13880)
2006 4.6 xlt
1 wire (bundle) that splits into 8 little wires???? that go straight into the port


Did you get the wrong cable?

Lars

4x4billy Wed, August 12th, 2009 11:57 PM
Quote:
Originally Posted by 88Racing (Post 13885)
04 heritage?
04 newer body style?
Did you get the wrong cable?

Lars
2006... typo:notallthere:

and as far as the cable... i have no clue?

88Racing Thu, August 13th, 2009 12:00 AM
So you have what we call "canned" tunes.
Wouldn't hurt to try and update the gryphon.
But it also might be a wrong cable?

Lars

88Racing Thu, August 13th, 2009 12:01 AM
Quote:
Originally Posted by 4x4billy (Post 13886)
2006... typo:notallthere:

and as far as the cable... i have no clue?
The year was my bad.

Lars

4x4billy Thu, August 13th, 2009 12:02 AM
and i check the cable how?

cable info

H00000700
REV 01
LOT 08 04
Atek 11/2008

88Racing Thu, August 13th, 2009 12:10 AM
Quote:
Originally Posted by 4x4billy (Post 13889)
and i check the cable how?

cable info

H00000700
REV 01
LOT 08 04
Atek 11/2008
Good start!
Now we have to wait for Bill.

Lars


All times are GMT -4. The time now is 06:12 PM.
Page 2 of 3 1 2 3
Show 100 post(s) from this thread on one page


All Contents Copyright 2008-2024, Power Hungry Performance