Power Hungry Performance Forum

Power Hungry Performance Forum (http://forum.gopowerhungry.com/index.php)
-   F.U. Chip & FU2 Flex Chip (DISCONTINUED) (Disabled) (http://forum.gopowerhungry.com/forumdisplay.php?f=63)
-   -   Fu Chip problem (http://forum.gopowerhungry.com/showthread.php?t=3484)

epowers777 Mon, March 15th, 2010 07:06 AM

I cant waite!!

soutthpaw Mon, March 15th, 2010 09:38 AM

I highly recommend going with a full synthetic engine oil like Rotella 5w40 synthetic... its available for $19.50 a gallon at Wally mart and they also sell the Motorcraft FL1995 filter for $10. If you are in a cold environment the syn oil will make a big difference in cold starting and warm up

epowers777 Wed, March 17th, 2010 05:37 PM

Hi I was wondering if Bill was in today. I would like to get the late 99 tunes pls.:) I told my chiropractor about you so hopefully he buys one!!

cleatus12r Wed, March 17th, 2010 06:22 PM

Quote:

Originally Posted by epowers777 (Post 27880)
Hi I was wondering if Bill was in today. I would like to get the late 99 tunes pls.:) I told my chiropractor about you so hopefully he buys one!!


If you make a new post in the General Support Requests forum, you may get a quicker response.

strokindually Wed, March 17th, 2010 09:53 PM

just for my understanding whats the differance between ca and federal tunes?

cleatus12r Wed, March 17th, 2010 10:06 PM

Mostly glow plug control. CA trucks had an actual module that controls and monitors each glow plug whereas 49 state trucks have a simple relay that just turns them all on and off.

epowers777 Thu, March 18th, 2010 05:10 AM

Here is the Vin 1FTWW33F3XEE84687

This is the full number printed on the board itself.
pwb6938/dpc-4xx/xc3f-ba and other side g-030954

can I us the obd2 scanner the get the hex code?

Jeremy Thu, March 18th, 2010 01:22 PM

This is all thats in Oasis for his truck, its too old to get anything else.

VIN: 1FTWW33F3XEE84687
Vehicle Data: 2E1F 18D8 FF3C



Module Information Found


PCM Module
PCM 1 FFFF FFFF FF0C
PCM 2 FFFF FFFF FF0D
PCM 3 FFFF FFFF FF0E
PCM 4 FFFF FFFF FF0F
PCM 5 FFFF FFFF FF10
PCM 6 FFFF FFFF FF11
PCM 7 FFFF FFFF FF12
PCM 8 FFFF FFFF FF13
PCM 9 FFFF FFFF FF14


BCE Modules
58-01 FFFF FFFF FF54


End of As Built information
FCXWS446

cleatus12r Thu, March 18th, 2010 04:59 PM

The thing that gets me is the XC3F-BA.

According to Bill's literature, there is no suffix of "BA" for the prefix of "XC3F". Just "BB-BG" which translate into NVK0-NVK5.

epowers777 Fri, March 19th, 2010 03:52 AM

Well the scanner did not work. It would link and when you go to vehicle info it says this is not supported. it says no codes stored and like2 monitors were working. When i pulled the carfax the the truck was a program car.


All times are GMT -4. The time now is 04:34 AM.


All Contents Copyright 2008-2024, Power Hungry Performance