Power Hungry Performance Forum

Power Hungry Performance Forum (http://forum.gopowerhungry.com/index.php)
-   Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) (http://forum.gopowerhungry.com/forumdisplay.php?f=32)
-   -   New chip - How to remove Banks stuff? (http://forum.gopowerhungry.com/showthread.php?t=6846)

cj45lc Fri, July 22nd, 2011 08:55 PM

Quote:

Originally Posted by txjeep (Post 49856)
Just took it for a spin. Didn't get to really test it out, but so far I am very pleased. The "theft" light blinks a lot. Is that normal? Also, will a key without a chip work in it now? Seems like I read that somewhere.

Thanks for all of the quick help!

yep it's a pretty nice difference huh, as far as the switch I put mine by my right knee in the lower dash just right of the fuse panel cover. Some folks have put them in some pretty neat spots so look around on PSN or some of the other sites or maybe google TS switch.

Someone alot smarter than me will have to give you some answers on the theft light deal, BTW welcome to the PHP crew. :thumbs up yellow:

Power Hungry Fri, July 22nd, 2011 11:22 PM

Because of limitations in the TS chips, we have to disable PATS in the Excursion. In order to prevent the theft light from blinking, disconnect the plug from the PATS module. The module is located below the dash, just to the right of the accelerator pedal and should have a red plug on the bottom of it. Just disconnect and the light goes out.

Yes, a standard key will work now.

txjeep Fri, July 22nd, 2011 11:24 PM

Perfect. Thanks. I appreciate all of the help.

txjeep Mon, August 1st, 2011 12:38 AM

I just got through towing my 9000 Lb travel trailer a couple hundred miles. The heavy tow setting is perfect. I got better mpg than expected as well (10-12mpg depending on the wind).

I do have one issue though. My wife does not like the shifts in the 80DD program at all. I also think they are a bit harsh. Is there anything that can be done about that? Thanks!

cleatus12r Mon, August 1st, 2011 10:16 AM

Quote:

Originally Posted by txjeep (Post 50155)
I do have one issue though. My wife does not like the shifts in the 80DD program at all. I also think they are a bit harsh. Is there anything that can be done about that? Thanks!


Reburn. If you would like to send the chip back, I will get you an RMA number and you can send it to me. I'll reburn it with less aggressive shifting in the 80DD (or any other programs that you need modified) and send it back.

txjeep Mon, August 1st, 2011 10:32 AM

Sounds good. Why don't you PM the info, address, instructions, etc. to me.

Thanks

txjeep Mon, September 26th, 2011 02:41 PM

FYI, the shifts are great now after the reburn. Very happy customer. Thanks.


All times are GMT -4. The time now is 12:52 AM.


All Contents Copyright 2008-2024, Power Hungry Performance