![]() |
Gryphon has finally returned :)
Today i received a box with the Gryphon inside of it- im super excited.
Thanks Corey and Bill! |
Be sure and let us know what you think, especially if you have custom tunes. :woot:
|
Quote:
x2 let us know what it does for your truck |
Was yours in the last batch that was sent out on Monday?
|
I put it back in tonight... Bill can correct me but i dont think my custom tune is loaded in there (unless he had time to create one im not sure though) But from what i gather that the custom tune takes along time to create. So i wouldnt expect one to be done in a week lol
The truck seems like it was when i sent it to them so i havent felt a difference. The canned tunes make the truck fun to drive but im curious to Bill's custom tune to see the difference. |
Quote:
If thats the case, from what I read on here and what was posted just the other day I believe you would already have the custom tune then :shrug: |
hmmm....
I forgot which level is the custom tune is on lol- i think i asked for level 1 to be overwritten but im not sure. I can tell a difference from stock to level 1 no doubt. Yeah i sent mine in to be converted from edge to gryphon. |
I had level 1 rewritten for an 87 perf tune. The tune is still called level 1 tranny...I'm hoping it's my custom tune, maybe Bill can't change the name of each tune. I haven't driven it yet...
|
Quote:
- Jack |
Quote:
I doubt they incorrectly loaded all 3 of ours, but even if they did I'm sure it was an honest mistake. I just e-mailed Corey about the situation. I'll address it on here as soon as I get a response. |
A note from Corey in the pkg said the tune was loaded. BTW, I took a 159 mile trip today in tune 1 and got 17.1mpg @ 77mph.
|
Ok so after a week of riding around... it seems that my mpg is better than before. Its not hard to get 15 in the city now. I was usually around 13-14.
The only thing i notice is it seems like it takes forever to get into O/D like i have to really be going over 50mph (sometimes 55mph) and maintain that speed while messing with the pedal to push it into O/D I havent tried level 2 yet to see if the same issue resides. I would assume my custom tune is loaded already- since that is what was the delay in the upgrades. |
You can adjust the O/D shift points in the Custom Options, if you want. I've reduced the upshift and downshift speeds by the maximum amount (I think it's -5) and I get into O/D in the 40+ mph range if I'm not doing any kind of hard acceleration.
Of course, Bill may have adjusted your shift points for a more aggressive power curve from a standing start, and he knew I didn't want that. - Jack |
Quote:
|
Quote:
- Jack |
Alright so i went into the programming and changed my 3-4 shift (std shifting) to -2 and it did nothing for me.
The O/D doesnt kick in until 55mph and above. Should i worry about this or leave it alone? I drive alot of 40mph speed limits all the way to work and its not in O/D the whole way. :shrug: I didnt see any TC options to set in there? |
I think you are gonna need Bill to tweak your custom tunes at this point if you could not get the tranny where you wanted it with the changes you made
|
Quote:
I'm VERY puzzled that you don't have Torque Converter choices in your Custom Options menu. As I recall, in my unit, it's the next choice below the shift options? You and I have nearly identical Gryphon's (your's might be a little newer - mine is a converted Edge). I think southpaw's right though, your custom tunes sound like they have the shift points way up in the rpm/speed curve (for more power) and I don't see how you're going to get the 3-4 upshift below 50. Bill CAN adjust those shift points down if it's really what you want. Even though I'm older than you, I don't really drive like a Grandpa. My truck accelerates easily with other traffic and I have no trouble accelerating faster if I want. I just had a thought though. What's your gearing and tire size? It may be that you really don't want the O/D on much earlier than it is. (As I recall, when mine kicks in and the TC locks, the RPM is about 1100, and you probably would not want it much below that). - Jack |
1100RPM? that's pretty low for a gasser... how far into the throttle do you get before it unlocks. I would think the engine would lug pretty bad if you tried any acceleration with the rpm's that low on a locked TC
|
Well i have the stock 20in rims from factory on my truck with stock tires.
Im not sure what that cooresponds to the gryphon becaus ei think i saw my tire size listed as 2760 i think- im not exactly sure by memory. my gear ratio i dont know that either off the top of my head but i think i saw it in the gryphon set as 3:73 I have a edge converted to gryphon as well Yeah around 50mph my rpms are at 1800 and once i hit 55mph i have to work at it to push it into O/D and then they go down to about 1200 rpm Yeah i have no option for TC control at all |
So on my way home from work i decided to try something
I put the gryphon into level 2 programming (since that is a canned tune still) The truck shifted to O/D immediately at 45 mph and felt like how it was before. The custom tune must have been loaded and causing this problem- its locked until 55mph Bill is there something you can do to fix this for me :) |
Im still waiting for this to be fixed????
|
All times are GMT -4. The time now is 02:33 PM. |
All Contents Copyright 2008-2024, Power Hungry Performance