Truck shaking around 60mph after mods installed
 

About 1 moth ago I installed a Banks Intake and cat back exhaust. At that time I was running a Edge Evo and ruturned it back to stock, so I could send it into PHP (Which I finally did last week). I've noticed that the truck shakes when at speeds of 57-63 mph. I did not do this before the mods, while I was running just the evo or stock. it only shakes in that speed range. Could the mods (Air Intake) be causing this? If so will the tunes fix that?
The only way I can describe the shaking is whien your wheels/tires are improperly balanced, but that is usually shaking in the steering whell. This feels like the whole engine/truck is shaking. Any ideas?

Year of truck?
Mileage?
Motor?

2008 F150
28k miles
5.4L

Try and disconnect the battery for 5 minutes.
This should reset the pcm.
Hope this helps.

Some other things I thought of;
Check your MAF to make sure its clean and installed correctly.
Check any hoses that were disconnected and reconnected.
:shrug:

This weekend I took to the truck to the dealership for some warrany repairs. Much to my surprise the shaking was a tire balance isse. They claim it was off by about 1oz. That didnt seem like much to me,but it doesnt shake anymore.:happy-dancing::happy-dancing:

Too Cool!
I'll add this to our trouble shooting tips!