Power Hungry Performance Forum

Power Hungry Performance Forum (http://forum.gopowerhungry.com/index.php)
-   2004 to 2008 F-150 and Mark-LT (http://forum.gopowerhungry.com/forumdisplay.php?f=13)
-   -   Need help (http://forum.gopowerhungry.com/showthread.php?t=4887)

mac Mon, July 12th, 2010 06:53 PM
Need help
 
I loaded my 87 tune and went to custom to check tire size. when the list appeared I went to hit the down key but hit enter in error. I now have a message that indicates ERROR F1 vehicle calitration not yet supported. The message won't go away, the evo will not shut down and i don't know how to fix it and am afraid to move the truck????

Longshot270 Mon, July 12th, 2010 07:30 PM
Try programming again. But for this time follow this procedure:
1. Leave the ignition key in the ON position.
2. Disconnect the Gryphon at the OBDII port.
3. Plug the Gryphon back into the OBDII port.
4. After getting to the main screen, wait 15 seconds for needed parameters to be loaded.

mac Mon, July 12th, 2010 08:06 PM
Thanks that worked

Longshot270 Mon, July 12th, 2010 08:11 PM
Good deal :thumbs up yellow:

Jackpine Mon, July 12th, 2010 09:06 PM
Quote:
Originally Posted by Longshot270 (Post 36920)
Try programming again. But for this time follow this procedure:
1. Leave the ignition key in the ON position.
2. Disconnect the Gryphon at the OBDII port.
3. Plug the Gryphon back into the OBDII port.
4. After getting to the main screen, wait 15 seconds for needed parameters to be loaded.
Nicely handled, my friend! :thumbs up yellow:

- Jack


All times are GMT -4. The time now is 07:45 PM.


All Contents Copyright 2008-2024, Power Hungry Performance