do they make one for a 09 f150 4.6 2valve
 

does anyone out there have an 09 f150 4.6L 2valve AND HAVE A GRYPON programmer. if you do can you let me know how well it works. or does it matter if you have a 2v or 3v:confused:

Both the Gryphon CS and CTS will work for the 09-10 4.6L 2V.

Power Hungry Performance - Gryphon™ CS & CTS - Gasoline

do you have a 2v or know anyone that does? is it worth the money? dont want to be dissapointed.

I have the 5.4L.

Pretty sure the Edge website does list hp/tq gains for the 5.4 and 4.6, but not sure about 2V. Custom tunes should provide an improvement over the canned tunes.

Perhaps Bill or someone from PHP can answer the hp/tq questions.

If you can provide the ECM code (either the 4 digit Box Code or the Ford part number) from the ECM, I can tell you without question if that particular vehicle is supported. To the best of my knowledge though, all the 4.6 and 5.4 engines are supported.

The PCM is located in the passenger side firewall. It has 3 connectors and 2-10mm bolts holding it in. The sticker with the part number/Box Code looks like this...

http://www.phptune.com/images/ecm_la...1_f150_ecm.jpg

I apologize for the quality. My Blackberry SUCKS at taking pictures.

I hope this helps.

PDS2 is the code is the first four like the ENP2 ON THE PIC

A cursory inspection of the file list indicates that your particular code is supported. :)

So are you 100% sure if I purchase from you guys I wont have any problems installing? :)

To the best of my knowledge, there should be know problems at all.