Power Hungry Performance Forum

Power Hungry Performance Forum (http://forum.gopowerhungry.com/index.php)
-   Phoenix Switch-On-The-Fly Chip (DISCOUNTINUED) (Disabled) (http://forum.gopowerhungry.com/forumdisplay.php?f=32)
-   -   *MODS* Posted help 4 days ago...haven't heard anything???? (http://forum.gopowerhungry.com/showthread.php?t=6351)

ToMang07 Wed, April 13th, 2011 09:03 PM

*MODS* Posted help 4 days ago...haven't heard anything????
 
I posted on Sunday in Specific Support Issues "General Support - This Section Can Only Be Viewed by Registered Users"
about a problem I am having with my chip....

Just wondering if you guys got it or if it just dissapeared? :fyi:

It said it had to be reviewed by a mod, I know there have been a few on in the last few days... so just trying to get some soert of follow up. :hmmm:

ToMang07 Thu, April 14th, 2011 04:14 PM

:help:

cleatus12r Thu, April 14th, 2011 05:08 PM

http://forum.gopowerhungry.com/speci...html#post46748

ToMang07 Thu, April 14th, 2011 05:16 PM

I just clicked on it, and the link didnt work. It said;
Quote:

vBulletin Message
Invalid Thread specified. If you followed a valid link, please notify the administrator


88Racing Thu, April 14th, 2011 07:24 PM

Quote:

Originally Posted by ToMang07 (Post 46766)
I just clicked on it, and the link didnt work. It said;

Check your thread you started in "specific support issues forum"....
Click link>>>http://forum.gopowerhungry.com/specific-support-issues/

ToMang07 Thu, April 14th, 2011 09:12 PM

Quote:

Originally Posted by 88Racing (Post 46769)
Check your thread you started in "specific support issues forum"....
Click link>>>http://forum.gopowerhungry.com/specific-support-issues/

I did, and when I go there it says:
Quote:

There are no posts in this forum.

:matt-roloff:

ToMang07 Thu, April 14th, 2011 09:13 PM

I should also add that when I go to "All subscribed Threads" it doesn't show up, either. :sigh:

Jackpine Thu, April 14th, 2011 09:21 PM

I think you need to try a different browser. Everyone (including me) except for you, seems to be able to see it.

Here is what Cody posted in that thresd:
The higher-HP settings were not changed at all from before but if it's even coming on in the stock program, there is certainly something going on with the truck.

Are you sure it's an overboost code?
- Jack

ToMang07 Thu, April 14th, 2011 11:53 PM

Quote:

Originally Posted by JackandJanet (Post 46776)
I think you need to try a different browser. Everyone (including me) except for you, seems to be able to see it.

Here is what Cody posted in that thresd:
The higher-HP settings were not changed at all from before but if it's even coming on in the stock program, there is certainly something going on with the truck.

Are you sure it's an overboost code?
- Jack

Thanks for the help. I can read it now, IDK what was up. It may have been the forum... I was trying to log on half an hout ago and it said it was down for maintenence. Either that or I'm just :notallthere:

I just responded, here is what I wrote:
Quote:

Originally Posted by ToMang07 (Post 46790)
Great. :doh:

Well, I assume it is, because it only comes on at WOT. I was driving with the pipes and Intake only, and max boost was 19PSI. I put the chip back on, and BAM, boost is 26-29PSI on WOT, but now the CEL is coming on. It only comes on for 1 minute, then goes off again.

Everything seems normal. Just the CEL. Drives INCREDIBLE.:evillol:

Is there any way to see what the code is WITHOUT going to a dealer???:hmmm:

Thanks for the responce/help! :embarrassed:


ticopowell Fri, April 15th, 2011 01:35 AM

weird... I get the same messages that ToMang07 was getting... I am using chrome, just tried it with IE and same problem... weird...


All times are GMT -4. The time now is 03:12 PM.


All Contents Copyright 2008-2024, Power Hungry Performance