Power Hungry Performance Forum

Power Hungry Performance Forum (http://forum.gopowerhungry.com/index.php)

- Gryphon Programmer (Disabled) (http://forum.gopowerhungry.com/forumdisplay.php?f=7)

- - Code reader (http://forum.gopowerhungry.com/showthread.php?t=6384)

Northern Supercrew

Mon, April 18th, 2011 03:16 PM

Code reader

Hey all, got a simple question. Recently while at work, our 2010 f150 had a MIL on, was wondering if my 04-08 Gryphon could have been used as a DTC reader for the 2010?..or is the CT/CTS only for that?.Turned out that someone had unplugged the MAF and that's what triggered the CEL.

Jackpine

Tue, April 19th, 2011 05:02 PM

Quote:

Originally Posted by Northern Supercrew (Post 46930)

Since no one's answered you, I'll give you an educated guess (which will bump the thread to the top) and say NO. As far as I know, the older model Gryphon/Edge will not work at all on 09+ trucks.

- Jack

Northern Supercrew

Tue, April 19th, 2011 05:15 PM

Thanks Jack:howdy:..you always come thru..i was hoping that i could just use the DTC part of my programmer. I tend to agree with your answer tho.

Jackpine

Tue, April 19th, 2011 07:43 PM

Yes, I don't see how the Gryphon could even boot, since it won't recognize the exotic new hex code. If it doesn't boot, I don't think the other functions are usable at all. But of course this is still just a WAG on my part.

- Jack

ticopowell

Thu, April 21st, 2011 09:56 AM

I don't think that it would work because the cable would most likely be different, same type of difference between the 97-03's and the 04-08's. but I may be wrong... :cheesy smile: I don't think that it would hurt to plug it in, but if my guess about the cable is right then it could possibly fry something that shouldn't be fried... just my 2 cents... :)

All times are GMT -4. The time now is 09:14 AM.