Power Hungry Performance Forum
Page 1 of 2 1 2
Show 100 post(s) from this thread on one page

Power Hungry Performance Forum (http://forum.gopowerhungry.com/index.php)
-   New Member Introductions (http://forum.gopowerhungry.com/forumdisplay.php?f=2)
-   -   North Jersey here (http://forum.gopowerhungry.com/showthread.php?t=718)

nine5flareside Sat, March 14th, 2009 06:33 PM
North Jersey here
 
I live in Northern NJ about 5 minutes from NYC. I have a 1995 F150 flareside with a few engine mods and I was interested in putting one of the PHP prducts in my truck for better performance.
What I have done:
All aluminum radiator
Dual electric fans
Msd ignition systen (igntion control box and coil)
K&N cold air intake system
BBK throttle body
Edelbrock 5.0 EFI truck intake manifold
Ford racing 1.7 rockers
Aluminum underdrive pulley kit
Bassani ceramic coated headers to 2 1/2" pipe
Hypertech chip
Cat removed
Smog pump removed
EGR removed
Tach installed

Only other major thing that I havent done is new heads.
I think I will just upgrade to GT40 heads.
Stock cam etc.

Now what line of products would work best for me from PHP.
I hope this isnt a dumb first question! Thanks for any help.

JWBFX4 Sat, March 14th, 2009 10:49 PM
Wow it looks like you have done a lot to the truck, welcome to the site :howdy:

88Racing Sat, March 14th, 2009 11:12 PM
Nice list of mods!

Welcome to the forum!

Lars
:cool_beans:

nine5flareside Mon, March 16th, 2009 12:44 AM
Thanks for the replies guys... so what should I be looking into as far as products from this site?

tg150 Mon, March 16th, 2009 09:45 AM
NNJ'er here also..:2thumbs: Passaic Cnty..Welcome to the sight :howdy:

Afrancis Mon, March 16th, 2009 11:12 AM
Welcome man.:howdy: I would say go for a Gryphon, Bill will help you decide on which custom tunes is best for your truck.

Jackpine Mon, March 16th, 2009 11:27 AM
Welcome from me too! :howdy: Your situation is a bit unique and I think Bill is the only one I'd trust to give good advice on a programmer/chip. :shrug: The cool thing about it is though, you can take everything he says to the bank! :thumbs up yellow:

- Jack

nine5flareside Mon, March 16th, 2009 10:22 PM
Quote:
Originally Posted by JackandJanet (Post 5739)
Welcome from me too! :howdy: Your situation is a bit unique and I think Bill is the only one I'd trust to give good advice on a programmer/chip. :shrug: The cool thing about it is though, you can take everything he says to the bank! :thumbs up yellow:

- Jack
LOL what makes my situation a bit unigue... that made me laugh!
I feel wierd now... in a unique sort of way that is! Thanks
again for all the input guys!

My truck is OBD 1 so I dont know about the gyphon.

nine5flareside Mon, March 16th, 2009 10:25 PM
Quote:
Originally Posted by tg150 (Post 5732)
NNJ'er here also..:2thumbs: Passaic Cnty..Welcome to the sight :howdy:
Im on fordf150.net stop by... theres a few north jersey heads there. I have the same name nine5flareside. And theres pics of my truck.

kokopellimotorsports Mon, March 16th, 2009 11:15 PM
Welcome to the site. Nice to have you.

Ty


All times are GMT -4. The time now is 06:58 AM.
Page 1 of 2 1 2
Show 100 post(s) from this thread on one page


All Contents Copyright 2008-2024, Power Hungry Performance