Power Hungry Performance Forum

Power Hungry Performance Forum (http://forum.gopowerhungry.com/index.php)
-   Gryphon Programmer (Disabled) (http://forum.gopowerhungry.com/forumdisplay.php?f=7)
-   -   a quick question (http://forum.gopowerhungry.com/showthread.php?t=7271)

ykt legend Tue, October 18th, 2011 08:49 PM

a quick question
 
ok all, for my first official post:howdy: I have a few questions to ask....first, i noticed that PHP only has a limited number of monochrome Gryphons. Are there still some left? My next question is if I buy a monochrome from edge directly do i have to send it in the PHP to be tuned or can I just download a program onto my computer and plug the edge into that? Thanks in advance:thumbs up yellow:

Jackpine Tue, October 18th, 2011 09:12 PM

Quote:

Originally Posted by ykt legend (Post 52177)
ok all, for my first official post:howdy: I have a few questions to ask....first, i noticed that PHP only has a limited number of monochrome Gryphons. Are there still some left? My next question is if I buy a monochrome from edge directly do i have to send it in the PHP to be tuned or can I just download a program onto my computer and plug the edge into that? Thanks in advance:thumbs up yellow:

PHP will only convert the monochrome programmers for the 04-08 trucks. Anything else has to be a CS/CTS programmer.

You send the monochrome programmer (if you bought it anywhere other than PHP) in to PHP to be converted to a Gryphon. The CS/CTS programmers are not sent in. If you buy a monochrome programmer from PHP, it is already converted, you just have to send in your .hex code once you get the programmer.

- Jack

ykt legend Tue, October 18th, 2011 09:18 PM

so if i buy directly from edge i just need to send a code not the actual programer? I dont really feel like waiting weeks to get my programer with custom tunes. I'd like to be able to enjoy it while im waiting for the tunes. Can you elaborate a little more about the process?

ykt legend Tue, October 18th, 2011 09:25 PM

Edit: Assume i just bought a cs from PHP. What procedure would i go about to get custom tunes for that?

ticopowell Wed, October 19th, 2011 12:11 AM

You need to find your HEX code, post it in this area of the forum, then wait for them to be done. You should receive instructions when you get your CS

Jackpine Wed, October 19th, 2011 11:08 AM

Quote:

Originally Posted by ykt legend (Post 52180)
so if i buy directly from edge i just need to send a code not the actual programer? I dont really feel like waiting weeks to get my programer with custom tunes. I'd like to be able to enjoy it while im waiting for the tunes. Can you elaborate a little more about the process?

I made a rather bad typo in the post just above the one of yours I'm quoting here. I've since edited it so that it reads correctly.

If you buy a monochrome programmer from PHP (not Edge), it is already "converted" and you don't "send it in". You don't "send in" the CS or CTS programmers regardless of where you buy them.

Once you have a programmer you can use it with its "canned tunes", while you're waiting for custom tunes. The programmer will show you the "hex"/calibration code if you follow the instructions at the top of the link ticopowell gave you.

- Jack

88Racing Wed, October 19th, 2011 12:21 PM

^^^^^What he said!^^^:thumbs up yellow:

Longshot270 Wed, October 19th, 2011 10:30 PM

I've got a quick question, are you the same ykt legend as on F150online? I may sell you mine.


All times are GMT -4. The time now is 04:38 AM.


All Contents Copyright 2008-2024, Power Hungry Performance