Edge Evolution 2 EEF2400 lot 050701
 

Hi I would like to know if this tuner can be converted to tune the ficm specifically with atlas 40 ?

if yes how do i proceed.

Thanks

What's the serial number of the device? Does it begin 200-xxx-xxx or 201-xxx-xxx?

000008866 ver 6
date of 5/7/2007

i am currently looking to buy a this used device and the current owner says it was used on a 4.6l ford is this the serial number you were asking for or should i ask the owner to plug the deivce in to obtain the serial number on the device it self.

Thanks again :)

Test

https://scontent-bos3-1.xx.fbcdn.net...4A&oe=622E8827

That's the number I needed, but for some reason it's not coming up in Fusion.

What I need to know if it's a Type 2 or Type 3 device. Can you have the seller send you a picture of the OBD end of the cable? That'll tell me 100% which device it is.

Thanks!

Hi Bill i asked for more pics but in the meantime please see this one below

Thanks

https://scontent-bos3-1.xx.fbcdn.net...WA&oe=6231986F

https://scontent-bos3-1.xx.fbcdn.net...qQ&oe=6253C20F


https://scontent-bos3-1.xx.fbcdn.net...rQ&oe=62567676


https://scontent-bos3-1.xx.fbcdn.net...gQ&oe=6256AE40

Hi Bill, are the pictures provide above good enough would this device be compatible ?

Thanks

I apologize for the delay. We have been out of town and our internet service was rubbish.

In any event, the device itself is compatible, but the cable is not. The cable pictured is for an early EEC style PCM used in the 97-03 F150 and 7.3L Power Stroke. You can use the device but you'll need to purchase the later CAN cable.

I hope this helps.