Thread: I may have found my loss of power (WITH PICS)
View Single Post
  #2  
Old Fri, March 12th, 2010, 06:39 PM
cleatus12r's Avatar
cleatus12r cleatus12r is offline
F Your Yankee Blue Jeans
  
Join Date: Jan 2009
Location: Somewhere in Montana
Posts: 2,665
cleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to allcleatus12r is a name known to all
Default
Bob, I can send you the bolt (I have a ton of extras) but being that I have removed quite a few of those, I can say with near absolute certainty that the sealant that holds those plenums on is nearly bulletproof and a leak there would be REALLY wet with oil....not just a bit damp and dirty like yours is. In addition, the bolt hole is a "blind" hole which means that it doesn't go through the casting into a place where it will leak through the bolt hole.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
Reply With Quote