Quote:
Originally Posted by MtPaul401
I'm looking at the order form and I don't know what some of the abbreviations are or where to find some of the info....I'm still fairly new to the diesel world so don't have a lot of background here....
where do I measure my exhaust down pipe to get the proper diameter?You can measure it right at the turbo, stock is 3.5"
what's intercooled? Intercoolers are widely used on turbo/ supercharges engines to cool the air before it enters the engine.
how do I find out my max boost PSI?Boost gauge or a scan tool/ scan gauge can find out max boost, stock is around 16 psi.
what's flow rate CC mean? This is a term used to describe aftermarket injectors and how much fuel they can deliver.
how do I find out stall RPM, or is that part of a mod torque converter?You can figure out what your stall is by standing on the brake and the accelerator at the same time in gear and watch what the RPM climb to.
Thanks!
|
I went Cleatus style...........see replies in blue.
I would not worry about filling out any these if the vehicle is stock. They are mainly used for modified vehicles.