A fork works great actually! As I said before. Unplug to take the needles off. Plug in and wait for them to stop twitching. Put them on in the exact place you had them originally. All my small needles were slightly below the low marks on the dash background. MPH is about a 1/4 inch below 10, and rpms needle was slightly above 0. Once the needles are in place, unplug again. Move the needles to mock what they do when driving. Plug back in and the needles should fall to the starting spot just like if you turned your truck off. Test again, following the same steps. If they work properly, button everything back up and enjoy your custom mod.
__________________
2nd place is 1st's loser!
2012 FX4 Waldoch M80 Edition Supercrew, 3.5L Ecoboost, Flowmaster Exhaust, K&N Air Filter, Road Armor Grill Guard, huge smile! 
|