Quote:
Originally Posted by kobra_commader
I don't think I have one but I'll check and see..... But when it was level 2 tow perform I'd lock and when I hit the gas it would stay locked Now when I'm doin like 60 and I wanna bring it up to 65 with a little gas the rpms go up to about 2200 from about 1500
|
I'm surprised the TC would stay locked if you stepped on the accelerator. The TC SHOULD unlock if you increase the throttle opening more than just a little bit. It does this in response to a demand for increased torque, which an unlocked TC allows by instantly increasing the engine RPM.
And, if you let off on the accelerator, the TC should also unlock, to let the engine "freewheel", so it doesn't drag your speed down. This saves on gas.
Do as Longshot says. Get a datalog and we might be able to tell you if an adjustment is needed.
As you might imagine, the TC tends to lock under very light load at cruise. It unlocks otherwise.
- Jack
__________________
2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam