Thread: Damaged programmer
View Single Post
  #2  
Old Thu, May 19th, 2011, 06:08 PM
Jackpine's Avatar
Jackpine Jackpine is offline
PHP Groupie
  
Join Date: Nov 2008
Location: Among Elk, Deer and Javalinas on the Mogollon Rim in Aridzona
Posts: 3,243
Jackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to allJackpine is a name known to all
Default
I've never seen a "blue screen". Do you have the monochrome Gryphon or one of the newer CS/CTS units?

If it's a monochrome Gryphon, it probably just needs to be "reset". With the ignition key ON (engine OFF), unplug the Gryphon at the OBD port. Wait about 15 seconds and then plug it back in again. If it shows your "hex" code, you're back in business.

If it's a CS or CTS. I'd unplug it and plug it back in again too, but the key does not have to be ON when you do this. If the boot process starts, you should be OK.

If these don't work, you'll have to talk to PHP.

- Jack
__________________

2024 F150 Platinum SCrew 3.5L PowerBoost FX4, Peragon Tonneau Cover, LineX Bed, 35% Window Tint on All Sides and Rear, Full Nose Paint Protection Film, Husky Mud Guards, Lasfit Floor Liners, VIOFO Dash Cam