I got by for years with sockets, a vice, and a hammer. However, there are press tools out there now for doing u-joints. They're not hard, but you can damage the yokes and/or shorten the life of the new joints if not installed properly.
Youtube has a ton of u-joint replacement/inspection videos.
__________________
Tuning, PCM flashing, and burning chips for 7.3s since 2008. Repairing all aspects of 7.3L Powerstrokes for 25 years.
Eight 7.3L PSDs in the driveway including a 1994 Crown Vic and 1973 F100/2002 F350. Looking for the next victim.
|