I don't know how well the corrugated pipe would work. What I've seen has fairly thin walls, and, if the outside diameter is right for the bellows, then it might have trouble fitting into the fender hole. However, it's not that expensive, and if it looks like it might work, I say give it a try. If it fits, it will work just fine.
The white PVC pipe is Sch 40, and has fairly thick walls. Dimensionally, it is identical to the black ABS pipe that I used.
There is little or no stress on this part of the intake. You can use just about anything that gives you the "tube" effect there.
- Jack
|